NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
8GB DDR3L 1333MHz ECC registered DIMM, 2Rx4 at 1.35V for server upgrades
This 8GB DDR3L module is built for servers and workstations that require registered ECC memory. It replaces Hynix HMT41GV7BMR4A-H9 and HMT41GV7CMR4A-H9 parts in compatible systems. The module is not suited for desktop boards that only accept unbuffered non-ECC DIMMs.
The stick uses a 240-pin DIMM form factor with a 2Rx4 organisation and major-brand chips. Registered signalling and on-board ECC reduce electrical load on the memory controller and correct single-bit errors, which is essential for 24/7 server workloads. Buyers needing unbuffered or non-ECC memory should look elsewhere.
Rated at 1.35V, the DDR3L module draws less power and generates less heat than standard 1.5V DDR3 at the same 1333MHz CL9 speed. Lower thermals help keep chassis fans quiet in dense rack environments. Systems that cannot run DDR3L at 1.35V will not support this module.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix |
| Model | HMT41GV7BMR4A-H9, HMT41GV7CMR4A-H9 |
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | HMT41GV7BMR4A-H9, HMT41GV7CMR4A-H9 |
Yes, the module runs at DDR3L 1333 (PC3L-10600) with CL9 latency, so throughput is limited to that rated speed.
It fits a standard DDR3 240-pin DIMM socket; the low-voltage DDR3L keying matches DDR3 slots that support 1.35V operation.
Ensure the server supports registered ECC memory and enable ECC in the BIOS after seating the module firmly until the retention clips lock.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?