NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
An 8 GB registered DDR4 module running at 2133 MHz with ECC and CL15 latency for server workloads
This 8GB DDR4 2133MHz ECC RDIMM module targets server and workstation administrators who need registered memory with error correction. The 2Rx8 organisation and CL15 latency suit platforms that require registered DIMMs for stable multi-module operation. It replaces specific Hynix part numbers in compatible systems.
The registered buffer reduces electrical load on the memory controller, allowing larger memory populations in supported servers. ECC circuitry detects and corrects single-bit errors to protect data integrity. Major-brand DRAM chips and 1.20V operation meet standard DDR4 voltage requirements for enterprise environments.
Installation follows standard 288-pin DIMM procedure: align the key notch, press firmly until the retention clips engage, and verify seating. Common issues include mixing registered and unbuffered modules, populating slots in an order the motherboard manual does not support, or using a platform that does not accept registered memory. Check system documentation before fitting.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module is built with major-brand chips tested to stringent quality standards and carries a lifetime warranty, so no scheduled chip replacement or reconfiguration is required.
Operating at the standard 1.20 V DDR4 voltage and CL15 latency, the registered buffer manages electrical load on the memory controller, keeping heat and bandwidth within the rated DDR4 2133 specification.
The stick draws 1.20 V with no moving parts, so it adds zero audible noise; the registered design and low-voltage DDR4 operation keep heat output minimal during sustained workloads.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?