NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
A-Tech
An 8 GB registered DDR4 module running at 2133 MHz with ECC and CL15 latency for server workloads
This 8GB DDR4 2133MHz ECC RDIMM module targets server and workstation administrators who need registered memory with error correction. The 2Rx8 organisation and CL15 latency suit platforms that require registered DIMMs for stable multi-module operation. It replaces specific Hynix part numbers in compatible systems.
The registered buffer reduces electrical load on the memory controller, allowing larger memory populations in supported servers. ECC circuitry detects and corrects single-bit errors to protect data integrity. Major-brand DRAM chips and 1.20V operation meet standard DDR4 voltage requirements for enterprise environments.
Installation follows standard 288-pin DIMM procedure: align the key notch, press firmly until the retention clips engage, and verify seating. Common issues include mixing registered and unbuffered modules, populating slots in an order the motherboard manual does not support, or using a platform that does not accept registered memory. Check system documentation before fitting.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
The module is built with major-brand chips tested to stringent quality standards and carries a lifetime warranty, so no scheduled chip replacement or reconfiguration is required.
Operating at the standard 1.20 V DDR4 voltage and CL15 latency, the registered buffer manages electrical load on the memory controller, keeping heat and bandwidth within the rated DDR4 2133 specification.
The stick draws 1.20 V with no moving parts, so it adds zero audible noise; the registered design and low-voltage DDR4 operation keep heat output minimal during sustained workloads.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?