Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips and gold contacts

A-Tech

A-Tech 8GB DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V Server Memory

SKU CH-NRHJ-TDMCF

8GB DDR4 2400 ECC registered DIMM with CL17 latency for server upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 design
  • 2400 MHz speed handles demanding server workloads efficiently
  • 2V operation reduces power consumption in dense configurations
  • Single-rank 1Rx8 layout maximises compatibility across Dell platforms
  • 288-pin DDR4 form factor fits standard server memory slots

8GB DDR4 2400 ECC RDIMM

This single 8GB registered DIMM adds error-correcting memory to compatible Dell servers and workstations. It targets administrators who need to expand capacity in systems that require registered modules with ECC support.

288-pin registered design with major-brand chips

The module uses a standard 288-pin DDR4 DIMM form factor and operates at 1.2V. Registered signalling reduces electrical load on the memory controller, while the 1Rx8 organisation and CL17 latency provide stable throughput for 2400MHz server platforms.

Replaces non-ECC or lower-capacity DDR4 DIMMs

The upgrade is worthwhile when the platform demands registered ECC memory and the current configuration lacks error correction or has free DIMM slots. Systems limited to unbuffered memory or speeds below 2400MHz cannot use this module.

Helstu kostir

  • ECC protection prevents data corruption with registered DDR4 design
  • 2400 MHz speed handles demanding server workloads efficiently
  • 2V operation reduces power consumption in dense configurations
  • Single-rank 1Rx8 layout maximises compatibility across Dell platforms
  • 288-pin DDR4 form factor fits standard server memory slots

Tæknilýsing

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spurningar um þessa vöru

What speed does the DDR4 2400 interface actually run at in a server?

The module operates at 2400 MHz, delivering a PC4-19200 data rate when the platform supports that speed.

What physical slot and pin count does this 288-pin RDIMM require?

It fits a standard DDR4 DIMM socket with 288 pins; the registered design adds a buffer chip on the module itself.

How do I install the 1Rx8 registered module and what step is often missed?

Power down, open the chassis, align the notch with the key in the 288-pin slot, press firmly until the ejector tabs click, then verify in BIOS that ECC and registered mode are enabled.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.