Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava

A-Tech

A-Tech 8GB DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V Server Memory

SKU CH-NRHJ-TDMCF

8GB DDR4 2400 ECC registered DIMM with CL17 latency for server upgrades

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data corruption with registered DDR4 design
  • 2400 MHz speed handles demanding server workloads efficiently
  • 2V operation reduces power consumption in dense configurations
  • Single-rank 1Rx8 layout maximises compatibility across Dell platforms
  • 288-pin DDR4 form factor fits standard server memory slots

8GB DDR4 2400 ECC RDIMM

This single 8GB registered DIMM adds error-correcting memory to compatible Dell servers and workstations. It targets administrators who need to expand capacity in systems that require registered modules with ECC support.

288-pin registered design with major-brand chips

The module uses a standard 288-pin DDR4 DIMM form factor and operates at 1.2V. Registered signalling reduces electrical load on the memory controller, while the 1Rx8 organisation and CL17 latency provide stable throughput for 2400MHz server platforms.

Replaces non-ECC or lower-capacity DDR4 DIMMs

The upgrade is worthwhile when the platform demands registered ECC memory and the current configuration lacks error correction or has free DIMM slots. Systems limited to unbuffered memory or speeds below 2400MHz cannot use this module.

Poudarki

  • ECC protection prevents data corruption with registered DDR4 design
  • 2400 MHz speed handles demanding server workloads efficiently
  • 2V operation reduces power consumption in dense configurations
  • Single-rank 1Rx8 layout maximises compatibility across Dell platforms
  • 288-pin DDR4 form factor fits standard server memory slots

Specifikacije

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vprašanja o tem izdelku

What speed does the DDR4 2400 interface actually run at in a server?

The module operates at 2400 MHz, delivering a PC4-19200 data rate when the platform supports that speed.

What physical slot and pin count does this 288-pin RDIMM require?

It fits a standard DDR4 DIMM socket with 288 pins; the registered design adds a buffer chip on the module itself.

How do I install the 1Rx8 registered module and what step is often missed?

Power down, open the chassis, align the notch with the key in the 288-pin slot, press firmly until the ejector tabs click, then verify in BIOS that ECC and registered mode are enabled.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.