A-Tech 8GB DDR3 1600 PC3-12800 240-Pin DIMM memory upgrade
- 8GB
- 240-Pin DDR3 SDRAM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
A-Tech
An 8 GB DDR4 2666 MHz registered ECC module with CL19 latency for servers and workstations
Capacity 8GB
This 8 GB DDR4 2666 registered DIMM adds ECC-protected capacity to compatible servers and workstations. The 288-pin module operates at 1.20 V with CL19 latency and a single-rank 1Rx4 layout. It is built for systems that require registered memory and will not function in standard desktop or laptop platforms.
Swapping out lower-speed DDR4 RDIMMs or filling empty slots raises throughput to PC4-21300 levels. The jump is worthwhile when workloads are memory-bound and the platform supports 2666 MT/s registered operation. Systems limited to slower DDR4 speeds or unbuffered memory cannot use this module.
The 8 GB module handles virtualization hosts, database buffers and multi-user workloads that benefit from ECC integrity. Headroom ends when aggregate demand exceeds the installed DIMM count or when the platform caps memory below the required total. Additional modules are needed for larger datasets.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 8GB 1Rx4 PC4-2666V-R |
| Capacity | 8GB |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
This module uses the standard 288-pin DDR4 DIMM form factor and requires a server or workstation motherboard with registered ECC DDR4 slots. It is not compatible with desktop or laptop systems.
The module must be seated firmly until the retention clips click on both ends, and the system BIOS must support registered ECC memory; otherwise the server will not POST or will report a memory error.
No firmware updates are required for the memory itself. The module is tested for lifetime reliability; replacement is only needed if a hardware fault occurs or if you expand capacity beyond the current 8 GB.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?