Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Deep black brass male-to-male G1/4 extension fitting, 10mm length

Alphacool

Alphacool G1/4" HF 10mm Male-Male Extension Fitting Deep Black 17215

SKU CH-VSX8-VE1X3

A high-flow G1/4" male-to-male extension fitting with 10 mm inner diameter in deep black finish

  • TypeFittings

Color Black

  • High-flow inner diameter maximises coolant throughput
  • Deep Black chromatised finish resists peeling and fading
  • G1/4" male-to-male threads extend or bridge components
  • Brass body with bonded colour layer ensures durability
  • Single 10 mm extension fitting included for custom loops

Deep Black extension fitting for custom loops

The Alphacool G1/4" HF 10mm male-to-male extension fitting in Deep Black connects two female-threaded components in a liquid-cooling loop. It suits builders who want a clean, high-flow link between blocks, radiators or manifolds. The deep black finish resists peeling thanks to a chromatised surface bonded to the brass body.

G1/4" threads with 10 mm inner bore

This fitting uses standard G1/4" outer threads on both ends and provides a 10 mm inner diameter for unrestricted coolant flow. It is the single specification that determines whether the part matches your existing hardware. Verify that every connected component has a G1/4" inner thread before purchase.

Passive component with no thermal or acoustic impact

As a solid brass connector the fitting adds no active heat, noise or power draw to the system. It simply extends the fluid path without affecting pump load or loop temperature. Builders who need active cooling performance should look at radiators, pumps or fans instead.

Helstu kostir

  • High-flow inner diameter maximises coolant throughput
  • Deep Black chromatised finish resists peeling and fading
  • G1/4" male-to-male threads extend or bridge components
  • Brass body with bonded colour layer ensures durability
  • Single 10 mm extension fitting included for custom loops

Tæknilýsing

TypeFittings

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much flow restriction does the 10 mm inner diameter add in a custom loop?

The 10 mm bore is marketed as high-flow, so it adds minimal restriction compared with narrower fittings.

What thread standard do the two G1/4" ends use?

Both ends are standard G1/4 BSPP threads, compatible with any G1/4 female port on blocks, radiators or reservoirs.

How much clearance is needed to fit the male-to-male extension between two components?

The fitting is a straight double nipple; allow enough space for the body length plus thread engagement on both sides.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.