暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Deep black brass male-to-male G1/4 extension fitting, 10mm length

Alphacool

Alphacool G1/4" HF 10mm Male-Male Extension Fitting Deep Black 17215

SKU CH-VSX8-VE1X3

A high-flow G1/4" male-to-male extension fitting with 10 mm inner diameter in deep black finish

  • TypeFittings

Color Black

  • High-flow inner diameter maximises coolant throughput
  • Deep Black chromatised finish resists peeling and fading
  • G1/4" male-to-male threads extend or bridge components
  • Brass body with bonded colour layer ensures durability
  • Single 10 mm extension fitting included for custom loops

Deep Black extension fitting for custom loops

The Alphacool G1/4" HF 10mm male-to-male extension fitting in Deep Black connects two female-threaded components in a liquid-cooling loop. It suits builders who want a clean, high-flow link between blocks, radiators or manifolds. The deep black finish resists peeling thanks to a chromatised surface bonded to the brass body.

G1/4" threads with 10 mm inner bore

This fitting uses standard G1/4" outer threads on both ends and provides a 10 mm inner diameter for unrestricted coolant flow. It is the single specification that determines whether the part matches your existing hardware. Verify that every connected component has a G1/4" inner thread before purchase.

Passive component with no thermal or acoustic impact

As a solid brass connector the fitting adds no active heat, noise or power draw to the system. It simply extends the fluid path without affecting pump load or loop temperature. Builders who need active cooling performance should look at radiators, pumps or fans instead.

特長

  • High-flow inner diameter maximises coolant throughput
  • Deep Black chromatised finish resists peeling and fading
  • G1/4" male-to-male threads extend or bridge components
  • Brass body with bonded colour layer ensures durability
  • Single 10 mm extension fitting included for custom loops

仕様

TypeFittings

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How much flow restriction does the 10 mm inner diameter add in a custom loop?

The 10 mm bore is marketed as high-flow, so it adds minimal restriction compared with narrower fittings.

What thread standard do the two G1/4" ends use?

Both ends are standard G1/4 BSPP threads, compatible with any G1/4 female port on blocks, radiators or reservoirs.

How much clearance is needed to fit the male-to-male extension between two components?

The fitting is a straight double nipple; allow enough space for the body length plus thread engagement on both sides.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。