Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
ASRock WS XE 360D 360mm AIO liquid cooler with three IP54 fans and thick radiator

ASRock

ASRock WS XE 360D 360mm Liquid Cooler 90-AWSA36-D46GA5

SKU CH-2GRX-AGJHE MPN 90-AWSA36-D46GA5

360 mm AIO liquid cooler for Intel Xeon LGA 4677 and 4710 CPUs with dual-pump redundancy, buzzer alarm, brazed full-copper cold plate and IP54-rated fans

Option WS XE 360D

  • Dual-pump redundancy with buzzer alarm protects workstation uptime
  • Brazed full-copper cold plate maximises heat transfer from Xeon CPUs
  • 38 mm high-density radiator sustains heavy multi-core workloads
  • Aerospace-grade LCP fan blades maintain precision at extreme RPM
  • IP54-rated fans resist dust and moisture for industrial reliability

Designed for Xeon Workstations

The ASRock WS XE 360D is a 360mm all-in-one liquid cooler built specifically for Intel Xeon processors using LGA 4677 or LGA 4710 sockets. Its dual-pump architecture provides redundant cooling for high-core-count CPUs running sustained, heavy workloads in professional environments.

Verify Socket and Clearance

Confirm your motherboard uses the LGA 4677 or LGA 4710 socket before ordering. Ensure the chassis can accommodate a 360mm radiator with a 38mm thickness plus fan depth, and that mounting hole spacing matches the cooler's bracket requirements.

Dual-Pump Redundancy in the Loop

The brazed full-copper cold plate transfers heat into a sealed loop where two pumps operate in parallel; a built-in buzzer sounds immediately if one fails. IP54-rated fans resist dust and moisture, while pre-applied Therm-X1 grease simplifies installation and ensures consistent thermal contact for long-duration stability.

Helstu kostir

  • Dual-pump redundancy with buzzer alarm protects workstation uptime
  • Brazed full-copper cold plate maximises heat transfer from Xeon CPUs
  • 38 mm high-density radiator sustains heavy multi-core workloads
  • Aerospace-grade LCP fan blades maintain precision at extreme RPM
  • IP54-rated fans resist dust and moisture for industrial reliability

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Aðrar útgáfur af þessari vöru

1 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the cooler ship with mounting hardware for Intel Xeon LGA 4677 and 4710 sockets, or must I buy a separate bracket?

The cooler is designed for Intel Xeon LGA 4677 and 4710 platforms and includes the required mounting hardware in the box.

Which radiator thickness should I choose for a high-core Xeon workstation — 38 mm or a thinner option?

The unit comes with a single 38 mm high-density radiator; no alternative thickness is offered for this model.

What does the 360 mm radiator size mean for actual thermal performance in a workstation chassis?

The 360 mm length houses three fans and a 38 mm thick core, providing the surface area needed for sustained heavy Xeon workloads.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.