Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
ASRock WS XE 360D 360mm AIO liquid cooler with three IP54 fans and thick radiator

ASRock

ASRock WS XE 360D 360mm Liquid Cooler 90-AWSA36-D46GA5

SKU CH-2GRX-AGJHE MPN 90-AWSA36-D46GA5

360 mm AIO liquid cooler for Intel Xeon LGA 4677 and 4710 CPUs with dual-pump redundancy, buzzer alarm, brazed full-copper cold plate and IP54-rated fans

Option WS XE 360D

  • Dual-pump redundancy with buzzer alarm protects workstation uptime
  • Brazed full-copper cold plate maximises heat transfer from Xeon CPUs
  • 38 mm high-density radiator sustains heavy multi-core workloads
  • Aerospace-grade LCP fan blades maintain precision at extreme RPM
  • IP54-rated fans resist dust and moisture for industrial reliability

Designed for Xeon Workstations

The ASRock WS XE 360D is a 360mm all-in-one liquid cooler built specifically for Intel Xeon processors using LGA 4677 or LGA 4710 sockets. Its dual-pump architecture provides redundant cooling for high-core-count CPUs running sustained, heavy workloads in professional environments.

Verify Socket and Clearance

Confirm your motherboard uses the LGA 4677 or LGA 4710 socket before ordering. Ensure the chassis can accommodate a 360mm radiator with a 38mm thickness plus fan depth, and that mounting hole spacing matches the cooler's bracket requirements.

Dual-Pump Redundancy in the Loop

The brazed full-copper cold plate transfers heat into a sealed loop where two pumps operate in parallel; a built-in buzzer sounds immediately if one fails. IP54-rated fans resist dust and moisture, while pre-applied Therm-X1 grease simplifies installation and ensures consistent thermal contact for long-duration stability.

Prednosti

  • Dual-pump redundancy with buzzer alarm protects workstation uptime
  • Brazed full-copper cold plate maximises heat transfer from Xeon CPUs
  • 38 mm high-density radiator sustains heavy multi-core workloads
  • Aerospace-grade LCP fan blades maintain precision at extreme RPM
  • IP54-rated fans resist dust and moisture for industrial reliability

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Ďalšie verzie tohto modelu

Ďalších 1 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Does the cooler ship with mounting hardware for Intel Xeon LGA 4677 and 4710 sockets, or must I buy a separate bracket?

The cooler is designed for Intel Xeon LGA 4677 and 4710 platforms and includes the required mounting hardware in the box.

Which radiator thickness should I choose for a high-core Xeon workstation — 38 mm or a thinner option?

The unit comes with a single 38 mm high-density radiator; no alternative thickness is offered for this model.

What does the 360 mm radiator size mean for actual thermal performance in a workstation chassis?

The 360 mm length houses three fans and a 38 mm thick core, providing the surface area needed for sustained heavy Xeon workloads.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.