Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black steel ATX mid-tower with mesh front panel, tempered glass side, USB-C front port

ASUS

ASUS Prime AP303 Mesh Panel PC Case Black

SKU CH-7KQH-SJ84C

A steel chassis with a filter-grade mesh front panel supports ATX, Micro-ATX and Mini-ITX boards, fits a 360 mm top radiator and 360 mm graphics card.

  • ColorBlack
  • Case MaterialSteel, Plastic, Tempered Glass
  • With Power SupplyNo
  • Motherboard CompatibilityATX Micro-ATX Mini-ITX
  • Front Ports1 x Headphones / Microphone 2 x USB 3.2 Gen 2x2 Type-C 4 x U
  • Fits ATX, Micro-ATX and Mini-ITX boards for flexible builds
  • USB 3.2 Gen 2x2 Type-C front port delivers 20 Gbps bandwidth
  • Top panel accepts 360 mm radiator for high-capacity liquid cooling
  • 34 mm rear cable space keeps wiring tidy and airflow clear
  • Steel frame with tempered glass side panel offers durable showcase styling

ATX Mesh Case for Custom Builds

The ASUS Prime AP303 is a mid-tower chassis that accepts ATX, Micro-ATX and Mini-ITX motherboards. A filter-grade mesh front panel promotes airflow while a tempered-glass side window shows the interior. One pre-installed 120 mm PWM rear fan is included for immediate exhaust.

Upgrade From Cramped or Solid-Front Cases

Builders moving from enclosures with restricted front intake or limited radiator support gain top mounts for 360, 280, 240, 140 and 120 mm radiators plus three 140 mm or 120 mm fan positions. The 360 mm graphics-card clearance and 165 mm CPU-cooler height accommodate larger components that would not fit in smaller towers.

Straightforward Assembly With Cable Room

Removable bottom dust filter and 34 mm rear cable-management clearance simplify routing and maintenance. Installers should verify that their power supply does not exceed 180 mm in length and that the 2.5/3.5 combo bay plus two dedicated 2.5 inch bays meet storage needs before purchase.

Helstu kostir

  • Fits ATX, Micro-ATX and Mini-ITX boards for flexible builds
  • USB 3.2 Gen 2x2 Type-C front port delivers 20 Gbps bandwidth
  • Top panel accepts 360 mm radiator for high-capacity liquid cooling
  • 34 mm rear cable space keeps wiring tidy and airflow clear
  • Steel frame with tempered glass side panel offers durable showcase styling

Tæknilýsing

BrandASUS
ColorBlack
Case MaterialSteel, Plastic, Tempered Glass
With Power SupplyNo
Motherboard CompatibilityATX
Micro-ATX
Mini-ITX
Front Ports1 x Headphones / Microphone
2 x USB 3.2 Gen 2x2 Type-C
4 x USB 3.2 Gen 1

Spurningar um þessa vöru

How much clearance does the case give behind the motherboard tray for cable routing?

The rear cable-management channel is 34 mm deep, so most ATX power cables and fan leads fit without bowing the side panel.

Which screw holes should I use first when mounting an ATX board to avoid mis-alignment?

Start with the centre standoff near the CPU cutout, then the rear-I/O corner holes, and finish with the front-edge pair; this sequence keeps the board flat while you tighten the rest.

Can the bottom dust filter be cleaned without moving the power supply?

Yes, the filter slides out from the front once the PSU is mounted, so you can vacuum or rinse it without unplugging any cables.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.