Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver metal rectangular 2U server PSU with rear fan grille and multiple cable connectors

Athena Power

Athena Power AP-RRU2ATX608 600W redundant server power supply

SKU CH-5PKM-M9E8V MPN AP-RRU2ATX608

A 600 W redundant 2U server supply with ATX, EPS, PCIe, SATA and Molex connectors and 100 000-hour MTBF

  • Single/RedundantRedundant
  • Maximum Power600W
  • Main ConnectorATX Connector 24(20+4) pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 Pi
  • Output3.3V-20A , +5V-20A, +12V-48A, +5Vsb-4A, -12V-0.3A
  • Input Frequency Range47 - 63 Hz
  • MTBF100,000 Hours on Maximum Load at +25 degree C
  • Redundant design keeps servers running during a module failure
  • 600W output powers demanding multi-processor configurations
  • 48A on the +12V rail feeds high-draw CPUs and GPUs
  • 100000-hour MTBF at 25°C indicates long service life
  • 17 ms hold-up time bridges brief power interruptions

600W Redundant Server PSU

The Athena Power AP-RRU2ATX608 is a 600W redundant power supply built for 2U server chassis. It delivers 48A on the +12V rail and 20A each on the 3.3V and +5V rails. The unit suits administrators who need continuous uptime from a hot-swap redundant module.

Thermals and Power Draw

The supply operates from 0°C to +50°C at full load with an MTBF of 100000 hours at +25°C. Hold-up time is 17 ms minimum at nominal input, and rise time stays below 20 ms. Input frequency range covers 47 Hz to 63 Hz for global mains compatibility.

Connectors and Mounting Implications

The module provides one 24(20+4) pin ATX connector, one P4 4-pin, two EPS 8-pin, two PCIE 6+2-pin, three SATA 15-pin and three Molex 4-pin leads. Its 3.30" x 2.99" x 9.84" form factor fits standard 2U redundant bays. Builders needing more SATA or PCIE outputs than listed will require additional distribution.

Helstu kostir

  • Redundant design keeps servers running during a module failure
  • 600W output powers demanding multi-processor configurations
  • 48A on the +12V rail feeds high-draw CPUs and GPUs
  • 100000-hour MTBF at 25°C indicates long service life
  • 17 ms hold-up time bridges brief power interruptions

Tæknilýsing

BrandAthena Power
ModelAP-RRU2ATX608
Single/RedundantRedundant
Maximum Power600W
Main ConnectorATX Connector 24(20+4) pin x 1
P4-12V 4 Pin x 1
EPS 12V 8 Pin x 2
PCIE 6+2 Pin x 2
SATA 15 Pin x 3
Molex 4 Pin x 3
Output3.3V-20A , +5V-20A, +12V-48A, +5Vsb-4A, -12V-0.3A
Input Frequency Range47 - 63 Hz
MTBF100,000 Hours on Maximum Load at +25 degree C
Hold-up Time17 ms Minimum at Nominal Input Voltage
FeaturesRise time: Less than 20 ms
Dimensions3.30" x 2.99" x 9.84" (H x W x L)
HumidityOperating: 0 degree C ~ +50 degree C on Full Load;
Storage & Shipping: -20 degree C ~ +80 degree C
Sendingarþyngd4.06 kg
Stærð sendingar455 × 178 × 135 mm

Spurningar um þessa vöru

How do I install the redundant modules in a 2U rack and what step is often missed?

Slide each module into the chassis until it locks, connect the ATX 24-pin, EPS 8-pin x2, PCIe 6+2-pin x2, SATA x3 and Molex x3 cables, then verify both AC inlets are powered; the step often missed is seating the second module fully so the redundant bus engages.

Which component will need replacement first and how can I tell?

The internal cooling fans typically wear out before the 100,000-hour MTBF rating; listen for bearing noise or watch for rising chassis temperatures above 50 °C as early indicators.

What limit appears first when the supply runs at full 600 W continuously?

The +12 V rail is rated at 48 A; sustained loads that approach this current will hit the over-current protection before the 17 ms hold-up time or thermal limits become factors.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.