SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391.99 $
0.00501458BTC
במלאי
Athena Power
Athena Power AP-RRU2ATX608 600W redundant server power supply
A 600 W redundant 2U server supply with ATX, EPS, PCIe, SATA and Molex connectors and 100 000-hour MTBF
- Single/RedundantRedundant
- Maximum Power600W
- Main ConnectorATX Connector 24(20+4) pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 Pi
- Output3.3V-20A , +5V-20A, +12V-48A, +5Vsb-4A, -12V-0.3A
- Input Frequency Range47 - 63 Hz
- MTBF100,000 Hours on Maximum Load at +25 degree C
- Redundant design keeps servers running during a module failure
- 600W output powers demanding multi-processor configurations
- 48A on the +12V rail feeds high-draw CPUs and GPUs
- 100000-hour MTBF at 25°C indicates long service life
- 17 ms hold-up time bridges brief power interruptions
600W Redundant Server PSU
The Athena Power AP-RRU2ATX608 is a 600W redundant power supply built for 2U server chassis. It delivers 48A on the +12V rail and 20A each on the 3.3V and +5V rails. The unit suits administrators who need continuous uptime from a hot-swap redundant module.
Thermals and Power Draw
The supply operates from 0°C to +50°C at full load with an MTBF of 100000 hours at +25°C. Hold-up time is 17 ms minimum at nominal input, and rise time stays below 20 ms. Input frequency range covers 47 Hz to 63 Hz for global mains compatibility.
Connectors and Mounting Implications
The module provides one 24(20+4) pin ATX connector, one P4 4-pin, two EPS 8-pin, two PCIE 6+2-pin, three SATA 15-pin and three Molex 4-pin leads. Its 3.30" x 2.99" x 9.84" form factor fits standard 2U redundant bays. Builders needing more SATA or PCIE outputs than listed will require additional distribution.
נקודות עיקריות
- Redundant design keeps servers running during a module failure
- 600W output powers demanding multi-processor configurations
- 48A on the +12V rail feeds high-draw CPUs and GPUs
- 100000-hour MTBF at 25°C indicates long service life
- 17 ms hold-up time bridges brief power interruptions
מפרט טכני
| Brand | Athena Power |
|---|---|
| Model | AP-RRU2ATX608 |
| Single/Redundant | Redundant |
| Maximum Power | 600W |
| Main Connector | ATX Connector 24(20+4) pin x 1 P4-12V 4 Pin x 1 EPS 12V 8 Pin x 2 PCIE 6+2 Pin x 2 SATA 15 Pin x 3 Molex 4 Pin x 3 |
| Output | 3.3V-20A , +5V-20A, +12V-48A, +5Vsb-4A, -12V-0.3A |
| Input Frequency Range | 47 - 63 Hz |
| MTBF | 100,000 Hours on Maximum Load at +25 degree C |
| Hold-up Time | 17 ms Minimum at Nominal Input Voltage |
| Features | Rise time: Less than 20 ms |
| Dimensions | 3.30" x 2.99" x 9.84" (H x W x L) |
| Humidity | Operating: 0 degree C ~ +50 degree C on Full Load; Storage & Shipping: -20 degree C ~ +80 degree C |
| משקל משלוח | 4.06 kg |
| מידות האריזה | 455 × 178 × 135 mm |
שאלות על הפריט הזה
How do I install the redundant modules in a 2U rack and what step is often missed?
Slide each module into the chassis until it locks, connect the ATX 24-pin, EPS 8-pin x2, PCIe 6+2-pin x2, SATA x3 and Molex x3 cables, then verify both AC inlets are powered; the step often missed is seating the second module fully so the redundant bus engages.
Which component will need replacement first and how can I tell?
The internal cooling fans typically wear out before the 100,000-hour MTBF rating; listen for bearing noise or watch for rising chassis temperatures above 50 °C as early indicators.
What limit appears first when the supply runs at full 600 W continuously?
The +12 V rail is rated at 48 A; sustained loads that approach this current will hit the over-current protection before the 17 ms hold-up time or thermal limits become factors.
גם במדף הזה
לקוחות השוו בין אלה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
