Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
White 360 mm AIO with three 120 mm ARGB fans and square pump block

BFKK

BFKK Wandering Knight 360mm ARGB Liquid Cooler White

SKU CH-28TZ-N9BCK

360 mm AIO liquid cooler with dual ceramic-bearing pumps delivering 300 L/h flow and three 120 mm HDB fans moving 65 CFM at 21–33 dBA, supporting Intel LGA 1700/1200/115x and AMD AM5/AM4 sockets

  • ColorWhite

Color White

  • Ceramic bearings resist coolant corrosion for lasting pump silence
  • Dual-pump design reaches 300L/H flow for 330W TDP cooling
  • Three 120mm fans deliver 65CFM airflow at 21-33 dBA noise
  • 360mm radiator with 400mm tubing fits wide Intel and AMD sockets
  • White ARGB lighting matches clean build aesthetics

Wandering Knight 360 mm AIO

The BFKK Wandering Knight is a 360 mm all-in-one liquid cooler with three 120 mm PWM fans and a dual-pump design. It targets builders who want strong CPU cooling in a white colour scheme and who value low noise at typical loads. The unit fits mainstream Intel and AMD desktop sockets. It is not for users who need a smaller radiator for compact cases or who prefer air cooling without tubing routing.

330 W TDP headroom and 300 L/h flow

The dual-chamber pump delivers a combined flow rate of 300 L/h with the base pump at 3000 RPM and the in-line pump at 4500 RPM. Rated thermal capacity reaches 330 W, so modern high-core-count CPUs stay cool under sustained multi-threaded workloads. The three fans push up to 65 CFM at 1800 RPM while noise stays between 21 and 33 dBA. Builds that regularly exceed 330 W heat output will hit the cooler's practical limit.

Standard 360 mm mounting and 400 mm tubing

The radiator measures 397 x 120 x 27 mm and uses common 120 mm fan spacing, fitting most mid-tower and larger cases that support 360 mm front or top mounts. Tubing length is 400 mm, which reaches typical CPU socket positions but may fall short in extended-ATX layouts with distant pump locations. The pump block is 70 x 50 mm and clears standard motherboard heatsinks. Cases without 360 mm radiator support or with tight clearance above the motherboard cannot use this cooler.

Helstu kostir

  • Ceramic bearings resist coolant corrosion for lasting pump silence
  • Dual-pump design reaches 300L/H flow for 330W TDP cooling
  • Three 120mm fans deliver 65CFM airflow at 21-33 dBA noise
  • 360mm radiator with 400mm tubing fits wide Intel and AMD sockets
  • White ARGB lighting matches clean build aesthetics

Tæknilýsing

ColorWhite

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 397 mm radiator and 400 mm tubing reach my existing case mounts without stretching?

The radiator measures 397 x 120 x 27 mm with 400 mm tubing, so check your case clearance against those dimensions before fitting.

How can I verify the dual pump is running at the rated 3000 RPM and 4500 RPM after installation?

Connect the pump headers to the motherboard and monitor RPM in BIOS or fan-control software; the first pump should read near 3000 RPM and the second near 4500 RPM.

Which mounting brackets for Intel LGA 1700 and AMD AM5 are included, and do I need a separate ARGB controller?

Brackets for Intel LGA 1700, 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2066 and AMD AM5, AM4, AM3 are supplied; ARGB control uses a standard 5 V 3-pin header on the motherboard.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.