Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

BFKK

BFKK Wandering Knight 360mm ARGB Liquid Cooler White

SKU CH-28TZ-N9BCK

360 mm AIO liquid cooler with dual ceramic-bearing pumps delivering 300 L/h flow and three 120 mm HDB fans moving 65 CFM at 21–33 dBA, supporting Intel LGA 1700/1200/115x and AMD AM5/AM4 sockets

  • ColorWhite

Color White

  • Ceramic bearings resist coolant corrosion for lasting pump silence
  • Dual-pump design reaches 300L/H flow for 330W TDP cooling
  • Three 120mm fans deliver 65CFM airflow at 21-33 dBA noise
  • 360mm radiator with 400mm tubing fits wide Intel and AMD sockets
  • White ARGB lighting matches clean build aesthetics

Wandering Knight 360 mm AIO

The BFKK Wandering Knight is a 360 mm all-in-one liquid cooler with three 120 mm PWM fans and a dual-pump design. It targets builders who want strong CPU cooling in a white colour scheme and who value low noise at typical loads. The unit fits mainstream Intel and AMD desktop sockets. It is not for users who need a smaller radiator for compact cases or who prefer air cooling without tubing routing.

330 W TDP headroom and 300 L/h flow

The dual-chamber pump delivers a combined flow rate of 300 L/h with the base pump at 3000 RPM and the in-line pump at 4500 RPM. Rated thermal capacity reaches 330 W, so modern high-core-count CPUs stay cool under sustained multi-threaded workloads. The three fans push up to 65 CFM at 1800 RPM while noise stays between 21 and 33 dBA. Builds that regularly exceed 330 W heat output will hit the cooler's practical limit.

Standard 360 mm mounting and 400 mm tubing

The radiator measures 397 x 120 x 27 mm and uses common 120 mm fan spacing, fitting most mid-tower and larger cases that support 360 mm front or top mounts. Tubing length is 400 mm, which reaches typical CPU socket positions but may fall short in extended-ATX layouts with distant pump locations. The pump block is 70 x 50 mm and clears standard motherboard heatsinks. Cases without 360 mm radiator support or with tight clearance above the motherboard cannot use this cooler.

Kohokohdat

  • Ceramic bearings resist coolant corrosion for lasting pump silence
  • Dual-pump design reaches 300L/H flow for 330W TDP cooling
  • Three 120mm fans deliver 65CFM airflow at 21-33 dBA noise
  • 360mm radiator with 400mm tubing fits wide Intel and AMD sockets
  • White ARGB lighting matches clean build aesthetics

Tekniset tiedot

ColorWhite

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 397 mm radiator and 400 mm tubing reach my existing case mounts without stretching?

The radiator measures 397 x 120 x 27 mm with 400 mm tubing, so check your case clearance against those dimensions before fitting.

How can I verify the dual pump is running at the rated 3000 RPM and 4500 RPM after installation?

Connect the pump headers to the motherboard and monitor RPM in BIOS or fan-control software; the first pump should read near 3000 RPM and the second near 4500 RPM.

Which mounting brackets for Intel LGA 1700 and AMD AM5 are included, and do I need a separate ARGB controller?

Brackets for Intel LGA 1700, 1200, 1150, 1151, 1155, 1156, 1366, 2011, 2066 and AMD AM5, AM4, AM3 are supplied; ARGB control uses a standard 5 V 3-pin header on the motherboard.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.