Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Brute Networks

Brute Networks 32GB DDR4-2666 2Rx4 1.2V 288-Pin Registered ECC Server RAM

SKU CH-AKZD-27174

32GB DDR4-2666 registered ECC server memory module with 2Rx4 organisation, 1.2V operation and 288-pin form factor, validated for HPE 882448-001 compatibility

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2666 (PC4 21300)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32GB capacity supports large server workloads
  • DDR4-2666 speed delivers 21300 MT/s data rates
  • Registered ECC design improves data integrity
  • 20V operation reduces power consumption
  • 288-pin form factor fits standard DDR4 slots

32GB Registered ECC DDR4 Module

This 32GB DDR4-2666 registered ECC module is built for servers that require error-correcting memory and signal buffering. It suits administrators expanding capacity in compatible HPE platforms or maintaining existing infrastructure. The 2Rx4 organisation and 1.20V operation match the original specification for stable enterprise workloads. Buyers who need non-ECC or unbuffered memory for desktop boards cannot use this module.

Fits 288-Pin DDR4 Slots Requiring Registered DIMMs

Installation requires a server motherboard with 288-pin DDR4 slots that support registered ECC DIMMs and the PC4-21300 speed grade. The module draws 1.20V and presents a 2Rx4 load to the memory controller, freeing the builder from mixing ranks or voltages. Systems that only accept unbuffered or consumer SO-DIMM formats will not accept this part. Identical modules ship together so matched populations are simple to achieve.

Replaces HPE 882448-001 at Lower Cost

This module is the direct equivalent of HPE part 882448-001, using the same major-brand DRAM and validated for 100% compatibility. The upgrade is worthwhile when a server has free registered DIMM slots and the workload benefits from additional ECC capacity. If the platform has reached its maximum DIMM count or requires a higher data rate, this 2666 MT/s kit will not extend those limits.

Helstu kostir

  • 32GB capacity supports large server workloads
  • DDR4-2666 speed delivers 21300 MT/s data rates
  • Registered ECC design improves data integrity
  • 20V operation reduces power consumption
  • 288-pin form factor fits standard DDR4 slots

Tæknilýsing

BrandHPE
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2666 (PC4 21300)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Spurningar um þessa vöru

What sustained-throughput ceiling does the DDR4-2666 rating impose on this 32 GB module?

The PC4-21300 designation means the module is rated for 21 300 MB/s maximum bandwidth, which is the first limit reached under continuous load.

How much heat and power does a 1.20 V registered DIMM add when the server runs 24/7?

At 1.20 V the module draws minimal power and produces little extra heat, while the registered buffer reduces electrical load on the memory controller.

Which server platforms already support 288-pin registered ECC DDR4 so this kit works without extra hardware?

Any system that accepts 288-pin DDR4 registered ECC memory — such as HPE servers using part 882448-001 — will recognise the module immediately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.