Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular memory module with gold edge connectors and black chips on both sides

Brute Networks

Brute Networks 370-ACFT-BN 16GB DDR4-2133 ECC UDIMM

SKU CH-966R-YP5MH

16 GB DDR4-2133 ECC UDIMM with CL15 timing and 1.2 V operation for Dell servers

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 16 GB DDR4-2133 ECC UDIMM expands server capacity
  • CL15 latency at 1.2 V keeps response tight
  • 2Rx8 dual-rank layout boosts throughput per slot
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability
  • Dell 370-ACFT compatible so factory warranty stays valid

16GB DDR4-2133 ECC UDIMM for Dell servers

This 16GB DDR4-2133 ECC UDIMM is built for Dell servers and workstations that require registered error-correcting memory. It matches Dell part number 370-ACFT and uses major-brand chips from Samsung, SK Hynix or Micron. The module runs at 1.20V with a CAS latency of 15.

288-pin installation with validated compatibility

Installation follows the standard 288-pin DDR4 UDIMM procedure; the module is unregistered so it fits directly into compatible Dell DIMM slots. Brute Networks validates every stick for 100% compatibility and supplies identically matched modules to avoid mixing ranks or chip revisions. Mismatched memory from other sources is the typical cause of boot failures or instability.

DDR4-2133 bandwidth and density limits

The PC4-17000 interface caps throughput at 17000 MB/s, so workloads that need higher memory bandwidth will not benefit from faster modules unless the platform supports them. A single 16GB 2Rx8 rank configuration limits total capacity by the number of available slots and the memory controller's maximum supported density. Systems requiring larger per-module capacities or higher speeds must use a different memory generation.

Helstu kostir

  • 16 GB DDR4-2133 ECC UDIMM expands server capacity
  • CL15 latency at 1.2 V keeps response tight
  • 2Rx8 dual-rank layout boosts throughput per slot
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability
  • Dell 370-ACFT compatible so factory warranty stays valid

Tæknilýsing

BrandDell
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset

Spurningar um þessa vöru

How do I confirm the 16GB DDR4-2133 module is running at the correct 1.20V and CL15 timings after installation?

Enter the server BIOS or UEFI and open the memory configuration screen; it should report 2133 MT/s, 1.20 V, CAS 15 and show ECC active for the 2Rx8 UDIMM.

What ships with the 370-ACFT-BN and is any extra hardware required to install it?

The box contains the 288-pin DDR4 UDIMM only; no cables, brackets or tools are included and none are needed for a standard DIMM slot.

Should I choose the 16GB PC4-17000 version or a different capacity for my Dell server?

Select this 16GB PC4-17000 DDR4-2133 ECC UDIMM when your system requires a 2Rx8 1.20V unregistered module matching Dell part 370-ACFT; other capacities have different part numbers.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.