We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular memory module with gold edge connectors and black chips on both sides

Brute Networks

Brute Networks 370-ACFT-BN 16GB DDR4-2133 ECC UDIMM

SKU CH-966R-YP5MH

16 GB DDR4-2133 ECC UDIMM with CL15 timing and 1.2 V operation for Dell servers

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 16 GB DDR4-2133 ECC UDIMM expands server capacity
  • CL15 latency at 1.2 V keeps response tight
  • 2Rx8 dual-rank layout boosts throughput per slot
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability
  • Dell 370-ACFT compatible so factory warranty stays valid

16GB DDR4-2133 ECC UDIMM for Dell servers

This 16GB DDR4-2133 ECC UDIMM is built for Dell servers and workstations that require registered error-correcting memory. It matches Dell part number 370-ACFT and uses major-brand chips from Samsung, SK Hynix or Micron. The module runs at 1.20V with a CAS latency of 15.

288-pin installation with validated compatibility

Installation follows the standard 288-pin DDR4 UDIMM procedure; the module is unregistered so it fits directly into compatible Dell DIMM slots. Brute Networks validates every stick for 100% compatibility and supplies identically matched modules to avoid mixing ranks or chip revisions. Mismatched memory from other sources is the typical cause of boot failures or instability.

DDR4-2133 bandwidth and density limits

The PC4-17000 interface caps throughput at 17000 MB/s, so workloads that need higher memory bandwidth will not benefit from faster modules unless the platform supports them. A single 16GB 2Rx8 rank configuration limits total capacity by the number of available slots and the memory controller's maximum supported density. Systems requiring larger per-module capacities or higher speeds must use a different memory generation.

Highlights

  • 16 GB DDR4-2133 ECC UDIMM expands server capacity
  • CL15 latency at 1.2 V keeps response tight
  • 2Rx8 dual-rank layout boosts throughput per slot
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability
  • Dell 370-ACFT compatible so factory warranty stays valid

Specifications

BrandDell
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnregistered
Rank2Rx8
ChipsetMajor Brand Chipset

Questions about this item

How do I confirm the 16GB DDR4-2133 module is running at the correct 1.20V and CL15 timings after installation?

Enter the server BIOS or UEFI and open the memory configuration screen; it should report 2133 MT/s, 1.20 V, CAS 15 and show ECC active for the 2Rx8 UDIMM.

What ships with the 370-ACFT-BN and is any extra hardware required to install it?

The box contains the 288-pin DDR4 UDIMM only; no cables, brackets or tools are included and none are needed for a standard DIMM slot.

Should I choose the 16GB PC4-17000 version or a different capacity for my Dell server?

Select this 16GB PC4-17000 DDR4-2133 ECC UDIMM when your system requires a 2Rx8 1.20V unregistered module matching Dell part 370-ACFT; other capacities have different part numbers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.