NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
Brute Networks
64GB DDR4-2933 load-reduced ECC server memory module with 4Rx4 organisation, 1.2V operation and 288-pin DDR4 interface
This is a 64GB DDR4 server memory module built to the PC4-23400 DDR4-2933 standard with load-reduced 4Rx4 organisation and ECC. It targets administrators who need to expand capacity in compatible HPE systems using a single high-density stick. Buyers who want more storage or non-ECC desktop memory should look elsewhere.
The module runs at DDR4-2933 (PC4-23400) with a 1.20V operating voltage, 288-pin DDR4 form factor, registered load-reduced buffering and 4Rx4 rank configuration. ECC is present. If your server requires a different speed, voltage, rank layout or unbuffered DIMMs this part will not work.
Installation follows standard 288-pin DDR4 DIMM procedure; align the notch, press until the retention clips engage, and verify seating. The most frequent issue is mixing load-reduced modules with standard registered or unbuffered DIMMs in the same channel, which prevents the system from posting. Always populate identical modules per channel and confirm the server BIOS recognises the full 64GB per slot.
| Brand | HPE |
|---|---|
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
The module runs at DDR4-2933; sustained bandwidth depends on the platform's memory controller and channel count, which vary by server model.
It uses the standard 288-pin DDR4 form factor and is validated for HPE part P19251-001; other DDR4-2933 slots accept it electrically.
Standard 288-pin DDR4 height fits regular server DIMM slots; the 4Rx4 load-reduced design does not change physical dimensions.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?