NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
Brute Networks
64GB DDR4-2933 load-reduced ECC server memory module with 4Rx4 organisation, 1.2V operation and 288-pin DDR4 interface
This is a 64GB DDR4 server memory module built to the PC4-23400 DDR4-2933 standard with load-reduced 4Rx4 organisation and ECC. It targets administrators who need to expand capacity in compatible HPE systems using a single high-density stick. Buyers who want more storage or non-ECC desktop memory should look elsewhere.
The module runs at DDR4-2933 (PC4-23400) with a 1.20V operating voltage, 288-pin DDR4 form factor, registered load-reduced buffering and 4Rx4 rank configuration. ECC is present. If your server requires a different speed, voltage, rank layout or unbuffered DIMMs this part will not work.
Installation follows standard 288-pin DDR4 DIMM procedure; align the notch, press until the retention clips engage, and verify seating. The most frequent issue is mixing load-reduced modules with standard registered or unbuffered DIMMs in the same channel, which prevents the system from posting. Always populate identical modules per channel and confirm the server BIOS recognises the full 64GB per slot.
| Brand | HPE |
|---|---|
| Capacity | 64GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 4Rx4 |
| Chipset | Major Brand Chipset |
The module runs at DDR4-2933; sustained bandwidth depends on the platform's memory controller and channel count, which vary by server model.
It uses the standard 288-pin DDR4 form factor and is validated for HPE part P19251-001; other DDR4-2933 slots accept it electrically.
Standard 288-pin DDR4 height fits regular server DIMM slots; the 4Rx4 load-reduced design does not change physical dimensions.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?