Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Brute Networks

Brute Networks P19253-001 HPE Compatible 16GB DDR4-2933 2Rx8 Registered ECC server RAM

SKU CH-QG9P-XZR5F

16 GB registered ECC DDR4 module at 2933 MHz with 2Rx8 organisation for HPE-compatible servers

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16 GB DDR4-2933 capacity for high-density server workloads
  • Registered ECC design protects data integrity in critical applications
  • 20 V operation reduces power draw per module
  • 2Rx8 288-pin layout fits standard DDR4 server slots
  • 100 % HPE-compatible validation ensures drop-in installation

16 GB DDR4-2933 Registered ECC Module

This 16 GB DDR4-2933 registered ECC module targets administrators upgrading HPE servers that require PC4-23400 memory. It uses a 2Rx8 organisation on a 288-pin DIMM and operates at the standard 1.2 V. The sticks are built with major-brand DRAM and validated for full compatibility.

Thermals noise and power draw

DDR4 memory runs passively and draws minimal power at 1.2 V, adding negligible heat to a populated server chassis. No active cooling is required beyond normal system airflow. Registered buffering reduces electrical load on the memory controller during heavy workloads.

Replaces OEM HPE P19253-001 sticks

The module directly replaces the HPE P19253-001 part while maintaining the original factory warranty. It suits fleets needing cost-effective capacity expansion without mixing vendors. The jump is worth it when identical modules are required across all slots for stable multi-channel operation.

Helstu kostir

  • 16 GB DDR4-2933 capacity for high-density server workloads
  • Registered ECC design protects data integrity in critical applications
  • 20 V operation reduces power draw per module
  • 2Rx8 288-pin layout fits standard DDR4 server slots
  • 100 % HPE-compatible validation ensures drop-in installation

Tæknilýsing

BrandHPE
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset

Spurningar um þessa vöru

How do I install the 288-pin DDR4 module and which notch alignment do people often miss?

Align the single off-centre notch on the 288-pin edge connector with the key in the DDR4 slot, press straight down until both retention clips click, and confirm the 1.20 V LED indicator lights if the board has one.

What maintenance or replacement will the registered ECC DIMM need over its service life?

The module itself has no user-serviceable parts; plan to replace it only if ECC correctable-error counts rise sharply or if a firmware update requires a different rank configuration.

What limit appears first when the 16 GB 2Rx8 kit runs at 2933 MHz under sustained load?

The registered buffer and 1.20 V supply keep signal integrity stable, so the practical ceiling is the memory controller’s maximum supported rank-per-channel limit rather than thermal throttling.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.