BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278045BTC
En stock
Brute Networks
Brute Networks P19253-001 HPE Compatible 16GB DDR4-2933 2Rx8 Registered ECC server RAM
16 GB registered ECC DDR4 module at 2933 MHz with 2Rx8 organisation for HPE-compatible servers
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2933 (PC4 23400)
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16 GB DDR4-2933 capacity for high-density server workloads
- Registered ECC design protects data integrity in critical applications
- 20 V operation reduces power draw per module
- 2Rx8 288-pin layout fits standard DDR4 server slots
- 100 % HPE-compatible validation ensures drop-in installation
16 GB DDR4-2933 Registered ECC Module
This 16 GB DDR4-2933 registered ECC module targets administrators upgrading HPE servers that require PC4-23400 memory. It uses a 2Rx8 organisation on a 288-pin DIMM and operates at the standard 1.2 V. The sticks are built with major-brand DRAM and validated for full compatibility.
Thermals noise and power draw
DDR4 memory runs passively and draws minimal power at 1.2 V, adding negligible heat to a populated server chassis. No active cooling is required beyond normal system airflow. Registered buffering reduces electrical load on the memory controller during heavy workloads.
Replaces OEM HPE P19253-001 sticks
The module directly replaces the HPE P19253-001 part while maintaining the original factory warranty. It suits fleets needing cost-effective capacity expansion without mixing vendors. The jump is worth it when identical modules are required across all slots for stable multi-channel operation.
Puntos fuertes
- 16 GB DDR4-2933 capacity for high-density server workloads
- Registered ECC design protects data integrity in critical applications
- 20 V operation reduces power draw per module
- 2Rx8 288-pin layout fits standard DDR4 server slots
- 100 % HPE-compatible validation ensures drop-in installation
Especificaciones
| Brand | HPE |
|---|---|
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
Preguntas sobre este artículo
How do I install the 288-pin DDR4 module and which notch alignment do people often miss?
Align the single off-centre notch on the 288-pin edge connector with the key in the DDR4 slot, press straight down until both retention clips click, and confirm the 1.20 V LED indicator lights if the board has one.
What maintenance or replacement will the registered ECC DIMM need over its service life?
The module itself has no user-serviceable parts; plan to replace it only if ECC correctable-error counts rise sharply or if a firmware update requires a different rank configuration.
What limit appears first when the 16 GB 2Rx8 kit runs at 2933 MHz under sustained load?
The registered buffer and 1.20 V supply keep signal integrity stable, so the practical ceiling is the memory controller’s maximum supported rank-per-channel limit rather than thermal throttling.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 US$
0.00280632BTC
En stock
