Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR2 memory sticks with gold contacts

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR2 5300 667MHz ECC Fully Buffered DIMM 2900 III memory upgrade

SKU CH-Y2HV-CF8N7

A 16 GB quad-channel DDR2 ECC fully buffered kit at 667 MHz for Dell PowerEdge 2900 III servers

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 16 GB kit adds capacity for Dell PowerEdge 2900 III
  • Fully buffered ECC design protects data integrity on servers
  • DDR2-667 speed matches original system specification
  • 240-pin DIMM form factor fits the server slots
  • Four matched 4 GB modules enable quad-channel performance

Capacity and Compatibility

This 16 GB kit contains four 4 GB DDR2 modules built for the Dell PowerEdge 2900 III. Each stick uses the 240-pin Fully Buffered DIMM form factor required by that server platform.

Sustained Operation

ECC circuitry and the fully buffered architecture correct single-bit errors and reduce electrical load on the memory bus during continuous server workloads. The modules run at 667 MHz with CL5 timing and a 1.8 V supply.

Physical Build

No heat spreaders are fitted, so airflow across the bare chips depends on the server’s internal cooling design. The four-stick package fills the matched channels specified for the 2900 III chassis.

Helstu kostir

  • 16 GB kit adds capacity for Dell PowerEdge 2900 III
  • Fully buffered ECC design protects data integrity on servers
  • DDR2-667 speed matches original system specification
  • 240-pin DIMM form factor fits the server slots
  • Four matched 4 GB modules enable quad-channel performance

Tæknilýsing

BrandComputer Memory Solutions
ModelCM512725300FBDIMM
Capacity16GB (4 x 4GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge 2900 Iii
Package Content4 Memory RAM Sticks

Spurningar um þessa vöru

How much power does the 1.8 V DDR2 5300 kit draw when the server runs continuously?

Each module operates at 1.8 V, the standard voltage for DDR2 5300 fully buffered DIMMs; total system power depends on the Dell PowerEdge 2900 III platform and workload.

What must the motherboard provide for these 240-pin fully buffered ECC modules to function?

The board must support 240-pin DDR2 fully buffered DIMM slots with ECC capability and the Intel 5000P chipset used in the Dell PowerEdge 2900 III.

Will the 2Rx4 organisation work alongside older 1Rx4 DDR2 sticks already in the 2900 III?

The PowerEdge 2900 III requires fully buffered DIMMs in matched pairs per branch; mixing 2Rx4 and 1Rx4 ranks is not supported by the platform memory controller.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.