暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Four green DDR2 memory sticks with gold contacts

Computer Memory Solutions

Computer Memory Solutions 16GB (4x4GB) DDR2 5300 667MHz ECC Fully Buffered DIMM 2900 III memory upgrade

SKU CH-Y2HV-CF8N7

A 16 GB quad-channel DDR2 ECC fully buffered kit at 667 MHz for Dell PowerEdge 2900 III servers

  • Capacity16GB (4 x 4GB)
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Timing5-5-5
  • Voltage1.8V
  • 16 GB kit adds capacity for Dell PowerEdge 2900 III
  • Fully buffered ECC design protects data integrity on servers
  • DDR2-667 speed matches original system specification
  • 240-pin DIMM form factor fits the server slots
  • Four matched 4 GB modules enable quad-channel performance

Capacity and Compatibility

This 16 GB kit contains four 4 GB DDR2 modules built for the Dell PowerEdge 2900 III. Each stick uses the 240-pin Fully Buffered DIMM form factor required by that server platform.

Sustained Operation

ECC circuitry and the fully buffered architecture correct single-bit errors and reduce electrical load on the memory bus during continuous server workloads. The modules run at 667 MHz with CL5 timing and a 1.8 V supply.

Physical Build

No heat spreaders are fitted, so airflow across the bare chips depends on the server’s internal cooling design. The four-stick package fills the matched channels specified for the 2900 III chassis.

特長

  • 16 GB kit adds capacity for Dell PowerEdge 2900 III
  • Fully buffered ECC design protects data integrity on servers
  • DDR2-667 speed matches original system specification
  • 240-pin DIMM form factor fits the server slots
  • Four matched 4 GB modules enable quad-channel performance

仕様

BrandComputer Memory Solutions
ModelCM512725300FBDIMM
Capacity16GB (4 x 4GB)
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Timing5-5-5
Voltage1.8V
ECCYes
Buffered/RegisteredFully Buffered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell Poweredge 2900 Iii
Package Content4 Memory RAM Sticks

この商品に関する質問

How much power does the 1.8 V DDR2 5300 kit draw when the server runs continuously?

Each module operates at 1.8 V, the standard voltage for DDR2 5300 fully buffered DIMMs; total system power depends on the Dell PowerEdge 2900 III platform and workload.

What must the motherboard provide for these 240-pin fully buffered ECC modules to function?

The board must support 240-pin DDR2 fully buffered DIMM slots with ECC capability and the Intel 5000P chipset used in the Dell PowerEdge 2900 III.

Will the 2Rx4 organisation work alongside older 1Rx4 DDR2 sticks already in the 2900 III?

The PowerEdge 2900 III requires fully buffered DIMMs in matched pairs per branch; mixing 2Rx4 and 1Rx4 ranks is not supported by the platform memory controller.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。