Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with gold edge connector and black memory chips

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 333 (PC 2700) CL2.5 100-pin SODIMM memory upgrade

SKU CH-N8QR-36PFM

512 MB DDR 333 (PC 2700) CL2.5 100-pin SODIMM upgrade for Lexmark C534, C540, C543, C544, C770 and C772 printers

  • Capacity512MB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512 MB capacity expands Lexmark printer memory for larger print jobs
  • DDR 333 (PC 2700) speed matches original system specifications
  • CL2.5 CAS latency supports stable data access at rated frequency
  • 100-pin SODIMM form factor fits Lexmark C534, C540, C543, C544, C770, C772 slots
  • Unbuffered non-ECC design installs directly without configuration changes

Lexmark Printer Memory Upgrade

This 512MB DDR 333 SODIMM is built for Lexmark C534, C540, C543, C544, C770 and C772 series printers. It installs in a 100-pin slot to increase the system memory available for print jobs and font handling. The module is unbuffered, non-ECC and runs at 2.5V.

DDR 333 PC2700 Interface Limits

The DDR 333 (PC 2700) standard tops out at 333 MHz with a typical CL2.5 latency and 2.5V operation. Bandwidth and timing are fixed by the JEDEC specification, so the printer chipset cannot run this module faster or at lower latency. Systems limited to slower DDR speeds will down-clock the stick automatically.

100-Pin SODIMM Form Factor

Compatibility depends entirely on the 100-pin SODIMM socket and the printer's maximum of 512MB per slot. Lexmark models listed accept one or two such modules up to 1GB total. Printers that require 144-pin, 200-pin or DIMM modules cannot use this part.

Helstu kostir

  • 512 MB capacity expands Lexmark printer memory for larger print jobs
  • DDR 333 (PC 2700) speed matches original system specifications
  • CL2.5 CAS latency supports stable data access at rated frequency
  • 100-pin SODIMM form factor fits Lexmark C534, C540, C543, C544, C770, C772 slots
  • Unbuffered non-ECC design installs directly without configuration changes

Tæknilýsing

BrandComputer Memory Solutions
ModelCM512MBPC2700100PIN
Capacity512MB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemLexmark C534Dtn C534N C540N C543Dn C544N C770N C772N
Package Content1 Memory RAM Stick

Spurningar um þessa vöru

Should I pick the 512MB stick or look for a larger capacity?

The module provides 512MB and each socket accepts up to 512MB; with two sockets the system maximum is 1GB.

What does the 333MHz rating mean once the stick is installed in my Lexmark printer?

It runs at DDR 333 (PC 2700) with CL2.5 timing and 2.5V, delivering the rated bandwidth for the C534, C540, C543, C544, C770 and C772 series.

How does the 100-pin SODIMM interface limit what I can use?

The 100-pin SODIMM slot only accepts unbuffered non-ECC DDR modules at 2.5V, so this PC2700 stick fits the electrical and mechanical requirements.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.