Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Green printed circuit board with gold edge connector and black memory chips

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 333 (PC 2700) CL2.5 100-pin SODIMM memory upgrade

SKU CH-N8QR-36PFM

512 MB DDR 333 (PC 2700) CL2.5 100-pin SODIMM upgrade for Lexmark C534, C540, C543, C544, C770 and C772 printers

  • Capacity512MB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512 MB capacity expands Lexmark printer memory for larger print jobs
  • DDR 333 (PC 2700) speed matches original system specifications
  • CL2.5 CAS latency supports stable data access at rated frequency
  • 100-pin SODIMM form factor fits Lexmark C534, C540, C543, C544, C770, C772 slots
  • Unbuffered non-ECC design installs directly without configuration changes

Lexmark Printer Memory Upgrade

This 512MB DDR 333 SODIMM is built for Lexmark C534, C540, C543, C544, C770 and C772 series printers. It installs in a 100-pin slot to increase the system memory available for print jobs and font handling. The module is unbuffered, non-ECC and runs at 2.5V.

DDR 333 PC2700 Interface Limits

The DDR 333 (PC 2700) standard tops out at 333 MHz with a typical CL2.5 latency and 2.5V operation. Bandwidth and timing are fixed by the JEDEC specification, so the printer chipset cannot run this module faster or at lower latency. Systems limited to slower DDR speeds will down-clock the stick automatically.

100-Pin SODIMM Form Factor

Compatibility depends entirely on the 100-pin SODIMM socket and the printer's maximum of 512MB per slot. Lexmark models listed accept one or two such modules up to 1GB total. Printers that require 144-pin, 200-pin or DIMM modules cannot use this part.

Pontos fortes

  • 512 MB capacity expands Lexmark printer memory for larger print jobs
  • DDR 333 (PC 2700) speed matches original system specifications
  • CL2.5 CAS latency supports stable data access at rated frequency
  • 100-pin SODIMM form factor fits Lexmark C534, C540, C543, C544, C770, C772 slots
  • Unbuffered non-ECC design installs directly without configuration changes

Especificações

BrandComputer Memory Solutions
ModelCM512MBPC2700100PIN
Capacity512MB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemLexmark C534Dtn C534N C540N C543Dn C544N C770N C772N
Package Content1 Memory RAM Stick

Perguntas sobre este artigo

Should I pick the 512MB stick or look for a larger capacity?

The module provides 512MB and each socket accepts up to 512MB; with two sockets the system maximum is 1GB.

What does the 333MHz rating mean once the stick is installed in my Lexmark printer?

It runs at DDR 333 (PC 2700) with CL2.5 timing and 2.5V, delivering the rated bandwidth for the C534, C540, C543, C544, C770 and C772 series.

How does the 100-pin SODIMM interface limit what I can use?

The 100-pin SODIMM slot only accepts unbuffered non-ECC DDR modules at 2.5V, so this PC2700 stick fits the electrical and mechanical requirements.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.