Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3 ECC registered DIMM sticks in anti-static bag

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3-1333 ECC Registered DIMM memory upgrade

SKU CH-0X3W-VVHV3

An 8 GB DDR3-1333 ECC registered DIMM kit for Dell PowerEdge R710 servers

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • ECC protection prevents data errors in critical workloads
  • Registered design supports dense 48 GB or 192 GB server configurations
  • 1333 MHz DDR3 speed matches Dell PowerEdge R710 specifications
  • Dual-rank 2Rx4 organisation maximises memory bandwidth
  • 2 × 4 GB kit enables dual-channel installation

Dell PowerEdge R710 ECC Kit

This 8 GB kit contains two 4 GB registered ECC DIMMs built for the Dell PowerEdge R710 server. Each module runs at DDR3-1333 with a CL9 timing and 1.5 V operation. The registered design adds signal buffering for stable multi-module configurations. It targets administrators expanding memory in compatible Dell rack servers.

8 GB Registered Capacity

The paired modules provide 8 GB of ECC protected memory for workloads that demand error correction. Registered signalling supports larger populations than unbuffered alternatives, yet the system caps registered DIMM populations at eighteen sockets across six banks. Quad-rank modules in the second bank drop to 800 MHz, and a third bank is disabled when quad-rank DIMMs are installed.

DDR3-1333 Interface Limits

The DDR3 interface operates at 1333 MHz but automatically clocks down to 1066 MHz or 800 MHz depending on the installed Xeon model and bank population. Mixing registered and unbuffered ECC modules is not supported. Maximum registered ECC capacity reaches 288 GB with dual CPUs, while unbuffered ECC tops out at 192 GB.

Helstu kostir

  • ECC protection prevents data errors in critical workloads
  • Registered design supports dense 48 GB or 192 GB server configurations
  • 1333 MHz DDR3 speed matches Dell PowerEdge R710 specifications
  • Dual-rank 2Rx4 organisation maximises memory bandwidth
  • 2 × 4 GB kit enables dual-channel installation

Tæknilýsing

BrandComputer Memory Solutions
ModelCM5127210600ECCR2R4H
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderBased on Current Inventory (If Required Please Contact)
Compatible SystemDell Poweredge R710
Package Content2 Memory RAM Sticks

Spurningar um þessa vöru

Will these DDR3-1333 modules run at full speed in my Dell PowerEdge R710 with older Xeon CPUs installed?

The modules will automatically clock down to 1066 MHz or 800 MHz depending on which Xeon model is fitted and how many banks are populated.

How can I confirm the ECC registered memory is detected correctly after installation?

Enter the system BIOS or use Dell OpenManage to verify all DIMM slots show 4 GB ECC Registered modules running at the expected speed.

Does the kit include any heat spreaders or extra cables for the PowerEdge R710?

The package contains two 4 GB DDR3 ECC Registered DIMMs only; heat spreaders are included only if current inventory requires them.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.