Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver dual-bay SATA dock with clone button

CoolGear

CoolGear SSX-COPY 1:1 HDD Copy Dock eSATA USB 2.0 2.5 3.5 Silver

SKU CH-D1Q9-Y4PEG

Duplicates SATA drives without a PC and connects two 2.5 or 3.5 inch drives via USB 2.0 at 480Mbps or eSATA at 3.0 Gbps

  • ColorSilver
  • FeaturesEasy to install and remove Hard Disk Drive, Available for 2
  • Standalone cloning copies drives without a PC
  • Dual-bay design holds two SATA drives at once
  • eSATA interface delivers up to 3.0 Gbps throughput
  • USB 2.0 port provides up to 480 Mbps connectivity
  • Tool-free slots accept 2.5 and 3.5 inch SATA drives

Compact dual-bay dock for SATA drives

The CoolGear SSX-COPY accepts both 2.5 and 3.5 inch SATA hard drives or SSDs in its two slots. It connects to a host via USB 2.0 or eSATA and can operate two drives at the same time. A dedicated clone button starts a sector-by-sector copy from the primary bay to the secondary bay without a computer running.

Tool-free drive bays and standalone cloning

Drives slide into the open-top slots with no screws or trays required. The rear eSATA port delivers up to 3.0 Gbps while the USB 2.0 link tops out at 480 Mbps. Power comes from the included external adapter so the unit works completely independently of a PC for duplication tasks.

Replaces internal drive bays and USB adapters

This dock removes the need to open a case or fiddle with loose SATA-to-USB cables when swapping drives. The jump is worth it for technicians who clone drives regularly or for anyone who wants a permanent, clutter-free station that handles two drives at once.

Helstu kostir

  • Standalone cloning copies drives without a PC
  • Dual-bay design holds two SATA drives at once
  • eSATA interface delivers up to 3.0 Gbps throughput
  • USB 2.0 port provides up to 480 Mbps connectivity
  • Tool-free slots accept 2.5 and 3.5 inch SATA drives

Tæknilýsing

BrandCoolgear
Part NumberSSX-COPY
ColorSilver
FeaturesEasy to install and remove Hard Disk Drive, Available for 2 SATA hard disk simultaneously., Supports USB 2.0 to Serial interface with transfer rates up to 480Mbps, Supports eSATA to SATA interface with transfer rates up to 3.0 Gbps, Suitable for most 3.5in and 2.5in SATA hard drives

Spurningar um þessa vöru

What transfer rate does the eSATA 3.0 Gbps interface cap at in practice?

The eSATA link runs at up to 3.0 Gbps, so real-world throughput is limited by the SATA drive’s own sustained read/write speed rather than the dock itself.

What drive sizes and how many drives fit the dock at once?

The dock accepts most 2.5 inch and 3.5 inch SATA drives and can hold two drives simultaneously — one in the top slot and a second cabled to the rear port.

How do I start a standalone clone and what step do users often miss?

Insert the source drive in the dock, connect the target drive to the rear SATA port, power on the unit, then press the clone button; the common mistake is forgetting to power the dock before pressing the button.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.