暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver dual-bay SATA dock with clone button

CoolGear

CoolGear SSX-COPY 1:1 HDD Copy Dock eSATA USB 2.0 2.5 3.5 Silver

SKU CH-D1Q9-Y4PEG

Duplicates SATA drives without a PC and connects two 2.5 or 3.5 inch drives via USB 2.0 at 480Mbps or eSATA at 3.0 Gbps

  • ColorSilver
  • FeaturesEasy to install and remove Hard Disk Drive, Available for 2
  • Standalone cloning copies drives without a PC
  • Dual-bay design holds two SATA drives at once
  • eSATA interface delivers up to 3.0 Gbps throughput
  • USB 2.0 port provides up to 480 Mbps connectivity
  • Tool-free slots accept 2.5 and 3.5 inch SATA drives

Compact dual-bay dock for SATA drives

The CoolGear SSX-COPY accepts both 2.5 and 3.5 inch SATA hard drives or SSDs in its two slots. It connects to a host via USB 2.0 or eSATA and can operate two drives at the same time. A dedicated clone button starts a sector-by-sector copy from the primary bay to the secondary bay without a computer running.

Tool-free drive bays and standalone cloning

Drives slide into the open-top slots with no screws or trays required. The rear eSATA port delivers up to 3.0 Gbps while the USB 2.0 link tops out at 480 Mbps. Power comes from the included external adapter so the unit works completely independently of a PC for duplication tasks.

Replaces internal drive bays and USB adapters

This dock removes the need to open a case or fiddle with loose SATA-to-USB cables when swapping drives. The jump is worth it for technicians who clone drives regularly or for anyone who wants a permanent, clutter-free station that handles two drives at once.

特長

  • Standalone cloning copies drives without a PC
  • Dual-bay design holds two SATA drives at once
  • eSATA interface delivers up to 3.0 Gbps throughput
  • USB 2.0 port provides up to 480 Mbps connectivity
  • Tool-free slots accept 2.5 and 3.5 inch SATA drives

仕様

BrandCoolgear
Part NumberSSX-COPY
ColorSilver
FeaturesEasy to install and remove Hard Disk Drive, Available for 2 SATA hard disk simultaneously., Supports USB 2.0 to Serial interface with transfer rates up to 480Mbps, Supports eSATA to SATA interface with transfer rates up to 3.0 Gbps, Suitable for most 3.5in and 2.5in SATA hard drives

この商品に関する質問

What transfer rate does the eSATA 3.0 Gbps interface cap at in practice?

The eSATA link runs at up to 3.0 Gbps, so real-world throughput is limited by the SATA drive’s own sustained read/write speed rather than the dock itself.

What drive sizes and how many drives fit the dock at once?

The dock accepts most 2.5 inch and 3.5 inch SATA drives and can hold two drives simultaneously — one in the top slot and a second cabled to the rear port.

How do I start a standalone clone and what step do users often miss?

Insert the source drive in the dock, connect the target drive to the rear SATA port, power on the unit, then press the clone button; the common mistake is forgetting to power the dock before pressing the button.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。