Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Square 120mm case fan in black or white finish with nine translucent blades and ARGB lighting ring

COOLMOON

COOLMOON 120mm ARGB Case Fan 1400 RPM 37.8 CFM 25-30 dBA 6-Pin Hydraulic Black/White

SKU CH-R2BY-W5004

120 mm ARGB case fan delivering 37.8 CFM at 1400 RPM with 25-30 dBA noise, hydraulic bearing, 5 V motherboard sync and wireless remote control

  • TypeCase Fan
  • Bearing TypeHydraulic
  • RPM<1600 RPM
  • Air Flow35-40 CFM
  • Noise Level25 - 30 dBA
  • Power ConnectorSmall 6PIN Fan + 4PIN Molex Hub
  • ARGB lighting synchronises with 5 V 3-pin motherboard headers
  • 1400 RPM airflow reaches 37.8 CFM for strong cooling
  • Hydraulic bearing rated for 30000 hours of quiet operation
  • Wireless IR remote and controller box adjust speed and effects
  • 120 mm frame with nine blades fits standard case mounts

120 mm ARGB case fan with proprietary 6-pin

The COOLMOON 120 mm ARGB fan uses a small 6-pin interface that requires the brand's own controller. It cannot connect directly to a standard motherboard header or work with other manufacturers' hubs. A single fan is intended for expansion of an existing COOLMOON kit rather than standalone use.

Hydraulic bearing rated for 30 000 hours

The hydraulic bearing supports speeds below 1 600 RPM with a typical operating point of 1 400 RPM. Noise stays between 25 and 30 dBA across the speed range. The 5 V addressable RGB signal follows a 3-pin motherboard synchronisation standard when the controller is linked to the board.

Delivers 37.8 CFM airflow for typical case cooling

Nine large blades on the 120 mm frame move 35 to 40 CFM, enough for standard chassis intake or exhaust and CPU heatsink assistance. The ABS construction resists corrosion and impact. Headroom diminishes in high-restriction layouts such as dense radiator stacks or heavily filtered enclosures where static pressure becomes the limiting factor.

Helstu kostir

  • ARGB lighting synchronises with 5 V 3-pin motherboard headers
  • 1400 RPM airflow reaches 37.8 CFM for strong cooling
  • Hydraulic bearing rated for 30000 hours of quiet operation
  • Wireless IR remote and controller box adjust speed and effects
  • 120 mm frame with nine blades fits standard case mounts

Tæknilýsing

TypeCase Fan
Bearing TypeHydraulic
RPM<1600 RPM
Air Flow35-40 CFM
Noise Level25 - 30 dBA
Power ConnectorSmall 6PIN Fan + 4PIN Molex Hub
ColorBlack / White
LEDARGB
FeaturesCoolmoon Case Fan

Spurningar um þessa vöru

Should I pick the black or white version for my build?

Both colours share the same 1400 RPM speed, 37.8 CFM airflow and 25–30 dBA noise, so choose the one that matches your case aesthetic.

What does the 37.8 CFM rating mean once the fan is installed?

At 1400 RPM the fan moves up to 37.8 cubic feet of air per minute, giving strong case ventilation while staying within the 25–30 dBA acoustic range.

How does the 6-pin connector work with my motherboard's 5V 3-pin ARGB header?

The fan uses a proprietary small 6-pin plug that connects to the included controller hub; the hub then links to a 5V 3-pin motherboard header for ARGB sync and a 4-pin Molex for power.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.