Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Square 120mm case fan in black or white finish with nine translucent blades and ARGB lighting ring

COOLMOON

COOLMOON 120mm ARGB Case Fan 1400 RPM 37.8 CFM 25-30 dBA 6-Pin Hydraulic Black/White

SKU CH-R2BY-W5004

120 mm ARGB case fan delivering 37.8 CFM at 1400 RPM with 25-30 dBA noise, hydraulic bearing, 5 V motherboard sync and wireless remote control

  • TypeCase Fan
  • Bearing TypeHydraulic
  • RPM<1600 RPM
  • Air Flow35-40 CFM
  • Noise Level25 - 30 dBA
  • Power ConnectorSmall 6PIN Fan + 4PIN Molex Hub
  • ARGB lighting synchronises with 5 V 3-pin motherboard headers
  • 1400 RPM airflow reaches 37.8 CFM for strong cooling
  • Hydraulic bearing rated for 30000 hours of quiet operation
  • Wireless IR remote and controller box adjust speed and effects
  • 120 mm frame with nine blades fits standard case mounts

120 mm ARGB case fan with proprietary 6-pin

The COOLMOON 120 mm ARGB fan uses a small 6-pin interface that requires the brand's own controller. It cannot connect directly to a standard motherboard header or work with other manufacturers' hubs. A single fan is intended for expansion of an existing COOLMOON kit rather than standalone use.

Hydraulic bearing rated for 30 000 hours

The hydraulic bearing supports speeds below 1 600 RPM with a typical operating point of 1 400 RPM. Noise stays between 25 and 30 dBA across the speed range. The 5 V addressable RGB signal follows a 3-pin motherboard synchronisation standard when the controller is linked to the board.

Delivers 37.8 CFM airflow for typical case cooling

Nine large blades on the 120 mm frame move 35 to 40 CFM, enough for standard chassis intake or exhaust and CPU heatsink assistance. The ABS construction resists corrosion and impact. Headroom diminishes in high-restriction layouts such as dense radiator stacks or heavily filtered enclosures where static pressure becomes the limiting factor.

Prednosti

  • ARGB lighting synchronises with 5 V 3-pin motherboard headers
  • 1400 RPM airflow reaches 37.8 CFM for strong cooling
  • Hydraulic bearing rated for 30000 hours of quiet operation
  • Wireless IR remote and controller box adjust speed and effects
  • 120 mm frame with nine blades fits standard case mounts

Špecifikácie

TypeCase Fan
Bearing TypeHydraulic
RPM<1600 RPM
Air Flow35-40 CFM
Noise Level25 - 30 dBA
Power ConnectorSmall 6PIN Fan + 4PIN Molex Hub
ColorBlack / White
LEDARGB
FeaturesCoolmoon Case Fan

Otázky k tomuto produktu

Should I pick the black or white version for my build?

Both colours share the same 1400 RPM speed, 37.8 CFM airflow and 25–30 dBA noise, so choose the one that matches your case aesthetic.

What does the 37.8 CFM rating mean once the fan is installed?

At 1400 RPM the fan moves up to 37.8 cubic feet of air per minute, giving strong case ventilation while staying within the 25–30 dBA acoustic range.

How does the 6-pin connector work with my motherboard's 5V 3-pin ARGB header?

The fan uses a proprietary small 6-pin plug that connects to the included controller hub; the hub then links to a 5V 3-pin motherboard header for ARGB sync and a 4-pin Molex for power.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.