Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Full-tower E-ATX case in orange with tempered glass side panels

Corn Electronics

Corn Electronics GR701 E-ATX PC case Dragon Ball Orange

SKU CH-1DH3-F6AVZ

A full-tower E-ATX case with dual 420 mm radiator support, four pre-installed 140 mm PWM fans, a metal GPU holder and a 60 W USB 4.0 Type-C front port

  • TypeATX Full Tower

Options Dragon Ball-01

Sjá 48 stillingar til viðbótar

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • E-ATX motherboard support fits large builds
  • Dual 420 mm radiator mounts enable extreme cooling
  • Four pre-installed 140 mm PWM fans move air quietly
  • Metal GPU holder prevents sag on heavy cards
  • 60 W USB Type-C fast charging powers devices quickly

What this case is

The Corn Electronics GR701 is a full-tower E-ATX chassis finished with UV-printed Dragon Ball Orange artwork that resists fading. It arrives with four 140 mm PWM fans pre-installed, dual tempered-glass panels and a metal GPU holder for heavy graphics cards up to 460 mm long. An integrated ARGB hub and 60 W USB Type-C fast-charging port sit on the front I/O alongside four USB 3.2 Gen1 ports, one USB 3.2 Gen2 Type-C and a combined audio jack.

Who it suits and who it does not

The case fits E-ATX boards up to 12 by 10.9 inches, standard ATX, Micro-ATX and Mini-ITX, and provides nine horizontal plus three vertical expansion slots for multi-GPU or add-in-card builds. Builders who need more than five 2.5-inch bays, more than two combo 2.5/3.5-inch bays, or a PSU longer than 240 mm should look elsewhere. The 34 mm cable-routing channel and removable dust filters on front, top and bottom keep internal wiring tidy and airflow clean.

The spec that decides fit

Radiator clearance reaches 420 mm at both front and top, so a dual 420 mm liquid-cooling loop fits without modification. CPU cooler height is limited to 190 mm and the chassis weighs 20.8 kg, so verify desk or floor capacity before ordering.

Helstu kostir

  • E-ATX motherboard support fits large builds
  • Dual 420 mm radiator mounts enable extreme cooling
  • Four pre-installed 140 mm PWM fans move air quietly
  • Metal GPU holder prevents sag on heavy cards
  • 60 W USB Type-C fast charging powers devices quickly

Tæknilýsing

Modelinternational version
TypeATX Full Tower

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I mount the case fans and where do I plug the ARGB hub so the lighting works?

Three 140 mm PWM fans are pre-installed at the front and one at the rear; connect their PWM and ARGB cables to the included hub, then link the hub to a motherboard 5 V ARGB header and a fan header for control.

Which dust filters need regular cleaning and how are they removed?

Removable filters sit at the front, top and bottom; slide each one out, rinse or vacuum the mesh, then slide it back — no tools required.

What is the longest graphics card that will still leave room for a front radiator?

The case accepts GPUs up to 460 mm long; a 420 mm front radiator fits alongside, but anything longer will reduce clearance for thick cards or tubing.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.