Corn Electronics GR701 Solo Leveling E-ATX PC case
- ATX Full Tower
אנחנו מקבלים תשלום בקריפטו — כך שמטבעות הקריפטו שברשותך יכולים לקנות ציוד אמיתי.שלם בקריפטו, קנה איתו ציוד אמיתי. משלוח חינם ומבוטח לכל העולם מעל 399 $. קרטונים ניטרליים וללא מיתוג, נשלחים מגרמניה.משלוח חינם ומבוטח מעל 399 $. השער שלך ננעל ל-30 דקות מרגע פתיחת הקופה.שער נעול ל-30 דקות. כל פריט אטום, המספר הסידורי שלו נבדק, והוא מכוסה באחריות ל-24 חודשים.אטום, באחריות ל-24 חודשים.
Corn Electronics
A full-tower E-ATX case with dual 420 mm radiator support, four pre-installed 140 mm PWM fans, a metal GPU holder and a 60 W USB 4.0 Type-C front port
Options Dragon Ball-01
גרסאות עם קו חוצה קיימות, אך אינן במלאי כאן.
The Corn Electronics GR701 is a full-tower E-ATX chassis finished with UV-printed Dragon Ball Orange artwork that resists fading. It arrives with four 140 mm PWM fans pre-installed, dual tempered-glass panels and a metal GPU holder for heavy graphics cards up to 460 mm long. An integrated ARGB hub and 60 W USB Type-C fast-charging port sit on the front I/O alongside four USB 3.2 Gen1 ports, one USB 3.2 Gen2 Type-C and a combined audio jack.
The case fits E-ATX boards up to 12 by 10.9 inches, standard ATX, Micro-ATX and Mini-ITX, and provides nine horizontal plus three vertical expansion slots for multi-GPU or add-in-card builds. Builders who need more than five 2.5-inch bays, more than two combo 2.5/3.5-inch bays, or a PSU longer than 240 mm should look elsewhere. The 34 mm cable-routing channel and removable dust filters on front, top and bottom keep internal wiring tidy and airflow clean.
Radiator clearance reaches 420 mm at both front and top, so a dual 420 mm liquid-cooling loop fits without modification. CPU cooler height is limited to 190 mm and the chassis weighs 20.8 kg, so verify desk or floor capacity before ordering.
| Model | international version |
|---|---|
| Type | ATX Full Tower |
גרסאות נוספות של דגם זה
אותה משפחה, זיכרון, קירור או תדר שונים — השווה לפני שתחליט.
Three 140 mm PWM fans are pre-installed at the front and one at the rear; connect their PWM and ARGB cables to the included hub, then link the hub to a motherboard 5 V ARGB header and a fan header for control.
Removable filters sit at the front, top and bottom; slide each one out, rinse or vacuum the mesh, then slide it back — no tools required.
The case accepts GPUs up to 460 mm long; a 420 mm front radiator fits alongside, but anything longer will reduce clearance for thick cards or tubing.
גם במדף הזה
אותו מדף, אותה קופה — שמונה מטבעות קריפטו ונעילת שער ל-30 דקות.
באיזה מטבע משלמים, ובאיזה מטבע מוצגים המחירים.
נשלח מהארנק שלך בקופה
לתצוגה בלבד — הקטלוג מתומחר בדולר ארה״ב
לא נמצא מטבע מתאים.
בחר את השפה שבה האתר פונה אליך.
חדש כאן?
כבר יש לך חשבון?
אין כאן איפוס אוטומטי: החנות הזו לא שולחת אימייל, ולכן אין קישור חד-פעמי לבקש. השאר את הכתובת בחשבון, והיא תטופל ידנית.
הבקשה נקלטה
שום דבר לא בדרך לתיבת האימייל שלך — החנות הזו לא שולחת אימייל בכלל. מישהו אוסף את הבקשות האלה ידנית.
נזכרת בה?