Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR3L UDIMM sticks in a dual-channel kit

Crucial

Crucial CT2K51264BD160B 8GB (2x4GB) DDR3L 1600 desktop RAM

SKU CH-8WJG-2XW7J MPN CT2K51264BD160B

8GB dual-channel DDR3L kit running at 1600 MT/s with CL11 latency and 1.35V operation

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

  • 8GB dual-channel kit doubles bandwidth for smoother multitasking
  • DDR3L 1600 MT/s speed delivers up to 12.8GB/s throughput per channel
  • Low 1.35V operation reduces power draw and heat output
  • CL11 latency keeps response times tight for everyday workloads
  • Built on 35 years of Micron engineering for proven reliability

Capacity and fit

This kit provides eight gigabytes in two four-gigabyte DDR3L modules rated at 1600 MT/s with CL11 latency. It is an unbuffered, non-ECC dual-channel set built to the standard UDIMM layout for desktop systems.

Before ordering

Verify that your motherboard accepts DDR3L UDIMM modules and can run at 1.35 volts or the supported 1.5 volt alternative. Check that two adjacent slots are free for the dual-channel pair and that the board’s memory controller supports 1600 MT/s operation.

Thermals and power

The low 1.35 volt operating voltage reduces power draw compared with standard DDR3 and keeps module temperatures modest under normal desktop workloads. Passive cooling on the green PCB is sufficient for typical use and the kit runs silently without active fans.

Helstu kostir

  • 8GB dual-channel kit doubles bandwidth for smoother multitasking
  • DDR3L 1600 MT/s speed delivers up to 12.8GB/s throughput per channel
  • Low 1.35V operation reduces power draw and heat output
  • CL11 latency keeps response times tight for everyday workloads
  • Built on 35 years of Micron engineering for proven reliability

Tæknilýsing

BrandCrucial
ModelCT2K51264BD160B
Capacity8GB (2 x 4GB)
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ColorGreen
FeaturesCT2K51264BD160B is an 8GB kit consisting of (2) 4GB DDR3L Desktop modules that operates at speeds up to 1600 MT/s and has a CL11 latency. It is Unbuffered and is non-ECC. It conforms to the industry standard UDIMM layout of 240 pins and is compatible with computers that take DDR3L UDIMM memory.
LED ColorNone
Sendingarþyngd0.07 kg
Stærð sendingar173 × 123 × 3 mm

Aðrar útgáfur af þessari vöru

4 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What comes in the CT2K51264BD160B box and is anything else required?

The kit contains two 4GB DDR3L UDIMM modules for a total of 8GB. No extra parts are needed; install both sticks into matching motherboard slots to run dual channel.

How do I decide between this 8GB dual-channel kit and a single 8GB stick?

Choose the CT2K51264BD160B when your board has two or four slots and you want the 12.8GB/s dual-channel bandwidth. Pick a single module only if you must leave one slot free for a later upgrade.

What does the 1600 MT/s rating mean once the RAM is installed?

The modules transfer data at up to 1600 MT/s with CL11 latency at 1.35V, delivering up to 12.8GB/s per channel. They also support 1.5V operation if the platform requires it.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.