Crucial CT51264BD160B 4GB DDR3L 1600 desktop RAM
- 4GB
- 240-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Crucial
8GB dual-channel DDR3L kit running at 1600 MT/s with CL11 latency and 1.35V operation
Capacity 8GB (2 x 4GB)
This kit provides eight gigabytes in two four-gigabyte DDR3L modules rated at 1600 MT/s with CL11 latency. It is an unbuffered, non-ECC dual-channel set built to the standard UDIMM layout for desktop systems.
Verify that your motherboard accepts DDR3L UDIMM modules and can run at 1.35 volts or the supported 1.5 volt alternative. Check that two adjacent slots are free for the dual-channel pair and that the board’s memory controller supports 1600 MT/s operation.
The low 1.35 volt operating voltage reduces power draw compared with standard DDR3 and keeps module temperatures modest under normal desktop workloads. Passive cooling on the green PCB is sufficient for typical use and the kit runs silently without active fans.
| Brand | Crucial |
|---|---|
| Model | CT2K51264BD160B |
| Capacity | 8GB (2 x 4GB) |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Color | Green |
| Features | CT2K51264BD160B is an 8GB kit consisting of (2) 4GB DDR3L Desktop modules that operates at speeds up to 1600 MT/s and has a CL11 latency. It is Unbuffered and is non-ECC. It conforms to the industry standard UDIMM layout of 240 pins and is compatible with computers that take DDR3L UDIMM memory. |
| LED Color | None |
| Lähetyspaino | 0.07 kg |
| Pakkauksen mitat | 173 × 123 × 3 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit contains two 4GB DDR3L UDIMM modules for a total of 8GB. No extra parts are needed; install both sticks into matching motherboard slots to run dual channel.
Choose the CT2K51264BD160B when your board has two or four slots and you want the 12.8GB/s dual-channel bandwidth. Pick a single module only if you must leave one slot free for a later upgrade.
The modules transfer data at up to 1600 MT/s with CL11 latency at 1.35V, delivering up to 12.8GB/s per channel. They also support 1.5V operation if the platform requires it.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?