SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
DELL
2.5-inch SAS hard drive delivers 1.8 TB at 10,000 RPM with a 12 Gb/s interface
The Dell 400-AJXO is a 1.8TB 2.5-inch internal hard drive spinning at 10000 RPM with a SAS interface. It is built for servers and storage arrays that require high-speed mechanical storage in a small form factor. The drive ships as a bare unit without a tray or bracket. This capacity and speed suit transactional databases and virtualisation hosts.
This drive fits 2.5-inch SAS drive bays that can use a 12Gb/s link and 10000 RPM spindle speed. It is not for systems limited to 3Gb/s SAS backplanes or controllers that cannot negotiate the higher transfer rate. Buyers needing larger capacity or solid-state endurance should evaluate other options.
The single specification that decides fit is the 12Gb/s SAS interface. The host controller and backplane must support this signalling rate to realise the drive’s rated transfer performance. A 3Gb/s or 6Gb/s SAS environment will limit throughput. Verify the platform’s SAS generation before purchase.
| Brand | Dell |
|---|---|
| Model | 400-AJXO |
| Packaging | Bare Drive |
| Interface | SAS 3Gb/s |
| Capacity | 1.8TB |
| RPM | 10000 RPM |
| Average Latency | 3Gb/s |
| Form Factor | 2.5" |
The drive uses a SAS interface and will connect to a 3Gb/s backplane, but it will operate at the slower 3Gb/s speed rather than its rated 12Gb/s transfer rate.
Check the system BIOS or RAID controller to confirm the drive is detected at 1.8TB capacity and shows a SAS link speed; run the manufacturer's diagnostic tool to validate the 10K RPM spindle speed and SMART health status.
The product is supplied as a bare drive only; a compatible 2.5" Dell drive tray or caddy must be purchased separately to install it in a server or storage array.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?