Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

DELL

DELL 400-AJXO 1.8TB 2.5" SAS 10000 RPM 12Gb/s internal hard drive

SKU CH-SHXA-GY0MA

2.5-inch SAS hard drive delivers 1.8 TB at 10,000 RPM with a 12 Gb/s interface

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity1.8TB
  • RPM10000 RPM
  • Average Latency3Gb/s
  • Form Factor2.5"
  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS interface supports 12Gb/s transfer rate
  • 5 inch form factor fits dense server bays
  • Genuine Dell part 400-AJXO ensures compatibility

Dell 400-AJXO 1.8TB SAS Drive

The Dell 400-AJXO is a 1.8TB 2.5-inch internal hard drive spinning at 10000 RPM with a SAS interface. It is built for servers and storage arrays that require high-speed mechanical storage in a small form factor. The drive ships as a bare unit without a tray or bracket. This capacity and speed suit transactional databases and virtualisation hosts.

Suits SAS Bays Needing 10K Performance

This drive fits 2.5-inch SAS drive bays that can use a 12Gb/s link and 10000 RPM spindle speed. It is not for systems limited to 3Gb/s SAS backplanes or controllers that cannot negotiate the higher transfer rate. Buyers needing larger capacity or solid-state endurance should evaluate other options.

12Gb/s SAS Interface Determines Compatibility

The single specification that decides fit is the 12Gb/s SAS interface. The host controller and backplane must support this signalling rate to realise the drive’s rated transfer performance. A 3Gb/s or 6Gb/s SAS environment will limit throughput. Verify the platform’s SAS generation before purchase.

Kohokohdat

  • 8TB capacity stores large datasets
  • 10000 RPM spindle delivers fast data access
  • SAS interface supports 12Gb/s transfer rate
  • 5 inch form factor fits dense server bays
  • Genuine Dell part 400-AJXO ensures compatibility

Tekniset tiedot

BrandDell
Model400-AJXO
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity1.8TB
RPM10000 RPM
Average Latency3Gb/s
Form Factor2.5"

Kysymyksiä tästä tuotteesta

Will the 400-AJXO 1.8TB 2.5" SAS drive work with my existing 3Gb/s SAS backplane?

The drive uses a SAS interface and will connect to a 3Gb/s backplane, but it will operate at the slower 3Gb/s speed rather than its rated 12Gb/s transfer rate.

How can I verify the 10000 RPM drive is performing correctly after installation?

Check the system BIOS or RAID controller to confirm the drive is detected at 1.8TB capacity and shows a SAS link speed; run the manufacturer's diagnostic tool to validate the 10K RPM spindle speed and SMART health status.

Does the bare drive 400-AJXO include a mounting tray or caddy for my Dell server?

The product is supplied as a bare drive only; a compatible 2.5" Dell drive tray or caddy must be purchased separately to install it in a server or storage array.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.