SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
DELL
An 8 TB desktop hard drive with a 12 Gb/s SAS interface, 7200 RPM spindle speed and hot-swap tray for nearline storage
The Dell 400-AQJK is an 8TB 3.5-inch nearline SAS hard drive spinning at 7200 RPM with a 12Gb/s interface. It arrives as a bare drive with hot-swap tray support for direct insertion into compatible bays. This unit suits storage arrays and servers that require high-capacity rotational storage on a SAS backbone.
It fits administrators expanding nearline storage pools in Dell PowerEdge or equivalent SAS-connected enclosures that accept 3.5-inch hot-swap trays. Buyers needing an internal drive for a desktop motherboard without a SAS controller or backplane should look elsewhere. Systems limited to 6Gb/s SAS links will operate at the lower link speed.
The 12Gb/s SAS interface is the single specification that decides compatibility; the drive requires a controller and backplane that support SAS 12Gb/s to achieve its rated transfer rate. Without a SAS host bus adapter or RAID card presenting a 12Gb/s wide port, the drive cannot be used. Verify your chassis and controller documentation for 3.5-inch hot-swap tray clearance and SAS 12Gb/s support before purchase.
| Brand | Dell |
|---|---|
| Model | 400-AQJK |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
The SAS 12Gb/s interface caps the theoretical transfer rate at 12 Gb/s. Actual throughput depends on the controller, cabling and system workload.
The drive uses a standard 3.5 inch form factor with a hot-swap tray that fits Dell PowerEdge bays designed for tool-less insertion.
Slide the tray into the bay until the lever locks; the step often missed is ensuring the lever clicks fully to engage the SAS connector.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?