SPARTAN 1-to-9 SATA HDD/SSD Duplicator H09HSHEB
- Hard Drive Duplicat…
- 1 to 9
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
DELL
An 8 TB desktop hard drive with a 12 Gb/s SAS interface, 7200 RPM spindle speed and hot-swap tray for nearline storage
The Dell 400-AQJK is an 8TB 3.5-inch nearline SAS hard drive spinning at 7200 RPM with a 12Gb/s interface. It arrives as a bare drive with hot-swap tray support for direct insertion into compatible bays. This unit suits storage arrays and servers that require high-capacity rotational storage on a SAS backbone.
It fits administrators expanding nearline storage pools in Dell PowerEdge or equivalent SAS-connected enclosures that accept 3.5-inch hot-swap trays. Buyers needing an internal drive for a desktop motherboard without a SAS controller or backplane should look elsewhere. Systems limited to 6Gb/s SAS links will operate at the lower link speed.
The 12Gb/s SAS interface is the single specification that decides compatibility; the drive requires a controller and backplane that support SAS 12Gb/s to achieve its rated transfer rate. Without a SAS host bus adapter or RAID card presenting a 12Gb/s wide port, the drive cannot be used. Verify your chassis and controller documentation for 3.5-inch hot-swap tray clearance and SAS 12Gb/s support before purchase.
| Brand | Dell |
|---|---|
| Model | 400-AQJK |
| Packaging | Bare Drive |
| Interface | SAS 12Gb/s |
| Capacity | 8TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
The SAS 12Gb/s interface caps the theoretical transfer rate at 12 Gb/s. Actual throughput depends on the controller, cabling and system workload.
The drive uses a standard 3.5 inch form factor with a hot-swap tray that fits Dell PowerEdge bays designed for tool-less insertion.
Slide the tray into the bay until the lever locks; the step often missed is ensuring the lever clicks fully to engage the SAS connector.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?