Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver rack server front with ten 2.5 inch drive bays

DELL

DELL PowerEdge R630 10SFF 2x Xeon E5-2687W v3 768GB DDR4

SKU CH-Y83W-H4853

Dual 10-core Xeon 3.1 GHz processors with 768GB DDR4 ECC memory in a 10-bay 2.5-inch rack chassis

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed3.1 GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size768GB
  • Dual 10-core Xeon CPUs at 3.1 GHz deliver high compute density
  • 768 GB DDR4 ECC memory supports large virtualisation workloads
  • 10 front 2.5-inch bays with PERC H730 SAS controller enable flexible storage
  • Dual 10 GbE plus dual 1 GbE ports provide high-throughput networking
  • iDRAC8 Enterprise licence gives full remote management out of the box

Dense compute for virtualisation

The Dell PowerEdge R630 fits two Xeon E5-2687W v3 processors and 768 GB of DDR4 ECC memory into a 1U rack chassis. Ten 2.5-inch drive bays and a PERC H730 SAS controller give storage flexibility for database or hypervisor clusters. Integrated iDRAC8 Enterprise enables remote lifecycle management without a separate console.

Steady throughput under load

Twenty cores at 3.1 GHz maintain frequency during extended compile, render or simulation runs because the 495 W redundant power supplies feed both sockets continuously. The H730 controller sustains write-heavy RAID workloads without throttling, while dual 10 GbE ports keep storage traffic off the management network. Memory bandwidth scales linearly across all 24 DIMM slots populated.

Thermal balance in a 1U form factor

Front-to-rear airflow moves heat from the CPUs and memory through a narrow 10-inch depth, keeping inlet temperatures within spec at typical data-centre set-points. Fan curves ramp gradually, so acoustic output stays predictable during overnight batch windows. Redundant 495 W units share load evenly, drawing only what the configured workload demands.

Helstu kostir

  • Dual 10-core Xeon CPUs at 3.1 GHz deliver high compute density
  • 768 GB DDR4 ECC memory supports large virtualisation workloads
  • 10 front 2.5-inch bays with PERC H730 SAS controller enable flexible storage
  • Dual 10 GbE plus dual 1 GbE ports provide high-throughput networking
  • iDRAC8 Enterprise licence gives full remote management out of the box

Tæknilýsing

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed3.1 GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size768GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)3,84
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Spurningar um þessa vöru

How much power do the dual 495W supplies draw when the R630 runs at full load all day?

The server includes two 495W power supplies; actual draw depends on workload but the units are sized for the 2x 10-core 3.1 GHz Xeon E5-2687W v3 configuration.

Which drive caddies and rails do I need to populate the 10 SFF bays?

The 10x 2.5" chassis accepts standard Dell 2.5" drive caddies; a rail kit is available on request for rack mounting.

Will the PERC H730 controller work with my existing SATA SSDs?

Yes, the PERC H730 SAS controller supports SATA drives, so older SATA SSDs can be used in the 10 SFF bays.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.