HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7540 8-Port NVMe RAID AIC
$1,749.99
0.02223226BTC
In stock
DELL
DELL PowerEdge R630 10SFF 2x Xeon E5-2687W v3 768GB DDR4
Dual 10-core Xeon 3.1 GHz processors with 768GB DDR4 ECC memory in a 10-bay 2.5-inch rack chassis
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed3.1 GHz
- # of Processors Installed2
- MAX Processors2
- Installed Memory Size768GB
- Dual 10-core Xeon CPUs at 3.1 GHz deliver high compute density
- 768 GB DDR4 ECC memory supports large virtualisation workloads
- 10 front 2.5-inch bays with PERC H730 SAS controller enable flexible storage
- Dual 10 GbE plus dual 1 GbE ports provide high-throughput networking
- iDRAC8 Enterprise licence gives full remote management out of the box
Dense compute for virtualisation
The Dell PowerEdge R630 fits two Xeon E5-2687W v3 processors and 768 GB of DDR4 ECC memory into a 1U rack chassis. Ten 2.5-inch drive bays and a PERC H730 SAS controller give storage flexibility for database or hypervisor clusters. Integrated iDRAC8 Enterprise enables remote lifecycle management without a separate console.
Steady throughput under load
Twenty cores at 3.1 GHz maintain frequency during extended compile, render or simulation runs because the 495 W redundant power supplies feed both sockets continuously. The H730 controller sustains write-heavy RAID workloads without throttling, while dual 10 GbE ports keep storage traffic off the management network. Memory bandwidth scales linearly across all 24 DIMM slots populated.
Thermal balance in a 1U form factor
Front-to-rear airflow moves heat from the CPUs and memory through a narrow 10-inch depth, keeping inlet temperatures within spec at typical data-centre set-points. Fan curves ramp gradually, so acoustic output stays predictable during overnight batch windows. Redundant 495 W units share load evenly, drawing only what the configured workload demands.
Highlights
- Dual 10-core Xeon CPUs at 3.1 GHz deliver high compute density
- 768 GB DDR4 ECC memory supports large virtualisation workloads
- 10 front 2.5-inch bays with PERC H730 SAS controller enable flexible storage
- Dual 10 GbE plus dual 1 GbE ports provide high-throughput networking
- iDRAC8 Enterprise licence gives full remote management out of the box
Specifications
| Brand | DELL |
|---|---|
| Series | PowerEdge |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 3.1 GHz |
| # of Processors Installed | 2 |
| MAX Processors | 2 |
| Installed Memory Size | 768GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 1.5TB |
| Hard Drive (Installed) | 3,84 |
| Storage Controller | Dell PERC H730 SAS Controller |
| HDD Interface | SATA |
| GPU Type | Integrated Graphics |
| Remote Management | iDRAC8 - Enterprise License |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions about this item
How much power do the dual 495W supplies draw when the R630 runs at full load all day?
The server includes two 495W power supplies; actual draw depends on workload but the units are sized for the 2x 10-core 3.1 GHz Xeon E5-2687W v3 configuration.
Which drive caddies and rails do I need to populate the 10 SFF bays?
The 10x 2.5" chassis accepts standard Dell 2.5" drive caddies; a rail kit is available on request for rack mounting.
Will the PERC H730 controller work with my existing SATA SSDs?
Yes, the PERC H730 SAS controller supports SATA drives, so older SATA SSDs can be used in the 10 SFF bays.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
HighPoint Technologies, Inc.
HighPoint Technologies, Inc. SSD7502 2-Port M.2 NVMe RAID Controller
$708.99
0.00900717BTC
In stock
