Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Silver 1U rack server with eight 2.5 inch drive bays front panel

DELL

DELL PowerEdge R630 8SFF Xeon E5-2698 v3 2.3GHz 384GB DDR4 No Drive

SKU CH-MDKZ-Q26WK

A 1U rack server with one Xeon E5-2698 v3 processor, 384GB DDR4 ECC memory, eight 2.5-inch drive bays and a PERC H730 RAID controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • Dense 2.5-inch storage in a 1U rack footprint
  • 16-core Xeon at 2.3 GHz handles heavy multi-threaded workloads
  • 384 GB DDR4 ECC memory supports large in-memory datasets
  • PERC H730 RAID controller delivers hardware-accelerated data protection
  • Dual 10 GbE plus dual 1 GbE ports provide high-throughput connectivity

PowerEdge R630 8SFF Server

The Dell PowerEdge R630 is a 1U rack server fitted with one Xeon E5-2698 v3 processor running at 2.3 GHz and 384 GB of DDR4 ECC registered memory. It targets organisations that need dense compute in a compact form factor for virtualisation, database or high-performance workloads.

Installation notes and common issues

The chassis accepts up to eight 2.5-inch drives that connect to the PERC H730 SAS controller through SATA or SAS backplanes. Drive caddies must match the 8SFF tray design; missing or mismatched caddies are the most frequent cause of drives not being detected during initial setup.

Pre-purchase checklist

Verify that your rack provides at least 36 inches of depth and can support the 40-pound unit with two 495 W power supplies installed. Confirm the iDRAC8 Enterprise licence meets your remote-management requirements and that the dual-port 10 GbE plus dual-port 1 GbE networking matches your switch topology.

Helstu kostir

  • Dense 2.5-inch storage in a 1U rack footprint
  • 16-core Xeon at 2.3 GHz handles heavy multi-threaded workloads
  • 384 GB DDR4 ECC memory supports large in-memory datasets
  • PERC H730 RAID controller delivers hardware-accelerated data protection
  • Dual 10 GbE plus dual 1 GbE ports provide high-throughput connectivity

Tæknilýsing

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)4,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Spurningar um þessa vöru

How can I confirm the PERC H730 controller and iDRAC8 Enterprise are functioning after installation?

During POST the H730 BIOS will list detected drives and the iDRAC8 network settings screen will appear; both indicate the controller and remote management are operational.

Which components are included and which must be purchased separately?

The chassis includes one E5-2698 v3 CPU, 384 GB DDR4 ECC memory, PERC H730 controller, dual 495 W power supplies and an Intel I350/X540 quad-port network card; 2.5-inch drives and rail kit are not included.

Should I choose the single-CPU 384 GB configuration or add a second processor to reach 1.5 TB?

The single E5-2698 v3 with 384 GB suits most virtualization workloads; adding the second supported CPU doubles core count and raises the memory ceiling to 1.5 TB for heavier database or HPC tasks.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.