暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Silver 1U rack server with eight 2.5 inch drive bays front panel

DELL

DELL PowerEdge R630 8SFF Xeon E5-2698 v3 2.3GHz 384GB DDR4 No Drive

SKU CH-MDKZ-Q26WK

A 1U rack server with one Xeon E5-2698 v3 processor, 384GB DDR4 ECC memory, eight 2.5-inch drive bays and a PERC H730 RAID controller

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.3GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • Dense 2.5-inch storage in a 1U rack footprint
  • 16-core Xeon at 2.3 GHz handles heavy multi-threaded workloads
  • 384 GB DDR4 ECC memory supports large in-memory datasets
  • PERC H730 RAID controller delivers hardware-accelerated data protection
  • Dual 10 GbE plus dual 1 GbE ports provide high-throughput connectivity

PowerEdge R630 8SFF Server

The Dell PowerEdge R630 is a 1U rack server fitted with one Xeon E5-2698 v3 processor running at 2.3 GHz and 384 GB of DDR4 ECC registered memory. It targets organisations that need dense compute in a compact form factor for virtualisation, database or high-performance workloads.

Installation notes and common issues

The chassis accepts up to eight 2.5-inch drives that connect to the PERC H730 SAS controller through SATA or SAS backplanes. Drive caddies must match the 8SFF tray design; missing or mismatched caddies are the most frequent cause of drives not being detected during initial setup.

Pre-purchase checklist

Verify that your rack provides at least 36 inches of depth and can support the 40-pound unit with two 495 W power supplies installed. Confirm the iDRAC8 Enterprise licence meets your remote-management requirements and that the dual-port 10 GbE plus dual-port 1 GbE networking matches your switch topology.

特長

  • Dense 2.5-inch storage in a 1U rack footprint
  • 16-core Xeon at 2.3 GHz handles heavy multi-threaded workloads
  • 384 GB DDR4 ECC memory supports large in-memory datasets
  • PERC H730 RAID controller delivers hardware-accelerated data protection
  • Dual 10 GbE plus dual 1 GbE ports provide high-throughput connectivity

仕様

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.3GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Hard Drive (Installed)4,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

この商品に関する質問

How can I confirm the PERC H730 controller and iDRAC8 Enterprise are functioning after installation?

During POST the H730 BIOS will list detected drives and the iDRAC8 network settings screen will appear; both indicate the controller and remote management are operational.

Which components are included and which must be purchased separately?

The chassis includes one E5-2698 v3 CPU, 384 GB DDR4 ECC memory, PERC H730 controller, dual 495 W power supplies and an Intel I350/X540 quad-port network card; 2.5-inch drives and rail kit are not included.

Should I choose the single-CPU 384 GB configuration or add a second processor to reach 1.5 TB?

The single E5-2698 v3 with 384 GB suits most virtualization workloads; adding the second supported CPU doubles core count and raises the memory ceiling to 1.5 TB for heavier database or HPC tasks.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。