Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Compact desktop solo miner in matte grey enclosure with copper heat-pipe cooling and XT60 power connector

DigLucky

DigLucky NerdQX 8T 8.0TH/s SHA256 Desktop Solo Miner mining hardware

SKU CH-QTT7-VZBSN

A desktop solo miner delivering 8.0 TH/s SHA-256 hashrate at 170 W with 2.4 GHz WiFi and integrated 250 W XT60 power supply

  • Part#DL-NerdQX8T
  • TypeDesktop Solo Miner
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate8.0 TH/s ±5%
  • 0 TH/s SHA-256 hashrate for solo Bitcoin mining
  • 170W power draw keeps efficiency near 21.25 J/TH
  • Industrial XT60 connector on included 250W supply prevents voltage drop
  • Copper heat-pipe plus auto-PWM fan keeps noise under 45 dB
  • Standalone 2.4 GHz WiFi node runs AxeOS without extra controller

DigLucky NerdQX 8T Solo Miner

The DigLucky NerdQX 8T is a desktop solo miner built for SHA-256 validation of Bitcoin. It integrates a synchronized BM1370 multi-chip ASIC array into a compact form factor suitable for home or office environments. The unit operates as a standalone AxeOS node with built-in 2.4GHz WiFi for direct stratum pool management. No external controller is required for deployment.

Sustained 170W Operation and Cooling

Under continuous load the miner draws 170W ±10% and maintains an efficiency of approximately 21.25 J/TH. A copper heat-pipe substrate paired with an auto-calibrating PWM fan manages thermals within a 0°C to 35°C operating range while keeping acoustic output below 45dB. The included 250W switching power supply connects via a gold-plated XT60 interface to ensure stable voltage delivery during 24/7 operation.

Upgrade from Lower Hashrate USB

This model replaces entry-level USB stick miners or single-chip boards that typically deliver a fraction of the 8.0 TH/s ±5% output. The jump is justified when the operator needs a self-contained, WiFi-enabled node that can run continuously on a standard household circuit without additional cooling infrastructure. The integrated power supply and autonomous firmware remove the need for separate host hardware.

Helstu kostir

  • 0 TH/s SHA-256 hashrate for solo Bitcoin mining
  • 170W power draw keeps efficiency near 21.25 J/TH
  • Industrial XT60 connector on included 250W supply prevents voltage drop
  • Copper heat-pipe plus auto-PWM fan keeps noise under 45 dB
  • Standalone 2.4 GHz WiFi node runs AxeOS without extra controller

Tæknilýsing

BrandDiglucky
SeriesNerdQX
ModelNerdQX 8T
Part#DL-NerdQX8T
TypeDesktop Solo Miner
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate8.0 TH/s ±5%
Quantity of Hash ChipsMulti-Chip Array
Hash Boards1
Network Connection2.4GHz WiFi (Standalone AxeOS Node)
Noise level< 45dB (Office Acceptable)
FanCopper Heat-Pipe & Auto-PWM Fan
Power Supply250W Switching Power Supply (XT60 Interface) Included
Power Consumption170W ±10%
Power Efficiency~21.25 J/TH±10%
Operation Temperature0°C - 35°C (32°F - 95°F)
Storage Temperature-20°C - 60°C (-4°F - 140°F)
Operation Humidity10% - 90% RH (Non-condensing)
Storage Humidity10% - 90% RH (Non-condensing)
Dimension18.5 x 8.0 x 11.5 cm
Weight0.77 kg
Feature8.0 TH/s MASSIVE HASHRATE: Powered by a synchronized Bitmain BM1370 multi-chip ASIC array, delivering a highly stable 8.0 TH/s (±5%) cryptographic output for your desktop solo mining node.
ULTRA-EFFICIENT 170W POWER: Engineered for home environments, achieving an outstanding ~21.25 J/TH efficiency ratio. It draws only 170W under continuous load, maximizing compute density without tripping circuit breakers.
COPPER HEAT-PIPE COOLING: Features a custom copper dissipation substrate paired with an auto-calibrating PWM fan. This dynamic system constantly monitors ASIC telemetry to prevent
Package Content1x DigLucky NerdQX 8T Miner, 1x 250W Power Supply (XT60 Interface), 1x US Standard AC Cable

Spurningar um þessa vöru

Will the included 250W power supply run the miner continuously at its 170W draw?

Yes, the 250W unit provides headroom above the 170W typical load and connects via a gold-plated XT60 interface for stable 24/7 delivery.

Can I operate this miner in a typical home office without special cooling?

The copper heat-pipe and auto-PWM fan keep noise below 45 dB and the unit is rated for 0–35 °C ambient, so standard office conditions are sufficient.

Does the miner need an external controller or PC to configure pools?

No, it runs standalone AxeOS over 2.4 GHz WiFi; all stratum settings are managed through the embedded web console.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.