Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Compact desktop solo miner in matte grey enclosure with copper heat-pipe cooling and XT60 power connector

DigLucky

DigLucky NerdQX 8T 8.0TH/s SHA256 Desktop Solo Miner mining hardware

SKU CH-QTT7-VZBSN

A desktop solo miner delivering 8.0 TH/s SHA-256 hashrate at 170 W with 2.4 GHz WiFi and integrated 250 W XT60 power supply

  • Part#DL-NerdQX8T
  • TypeDesktop Solo Miner
  • Crypto AlgorithmSHA-256
  • Compatible CurrencyBitcoin (BTC)
  • Mining HardwareASIC
  • Hashrate8.0 TH/s ±5%
  • 0 TH/s SHA-256 hashrate for solo Bitcoin mining
  • 170W power draw keeps efficiency near 21.25 J/TH
  • Industrial XT60 connector on included 250W supply prevents voltage drop
  • Copper heat-pipe plus auto-PWM fan keeps noise under 45 dB
  • Standalone 2.4 GHz WiFi node runs AxeOS without extra controller

DigLucky NerdQX 8T Solo Miner

The DigLucky NerdQX 8T is a desktop solo miner built for SHA-256 validation of Bitcoin. It integrates a synchronized BM1370 multi-chip ASIC array into a compact form factor suitable for home or office environments. The unit operates as a standalone AxeOS node with built-in 2.4GHz WiFi for direct stratum pool management. No external controller is required for deployment.

Sustained 170W Operation and Cooling

Under continuous load the miner draws 170W ±10% and maintains an efficiency of approximately 21.25 J/TH. A copper heat-pipe substrate paired with an auto-calibrating PWM fan manages thermals within a 0°C to 35°C operating range while keeping acoustic output below 45dB. The included 250W switching power supply connects via a gold-plated XT60 interface to ensure stable voltage delivery during 24/7 operation.

Upgrade from Lower Hashrate USB

This model replaces entry-level USB stick miners or single-chip boards that typically deliver a fraction of the 8.0 TH/s ±5% output. The jump is justified when the operator needs a self-contained, WiFi-enabled node that can run continuously on a standard household circuit without additional cooling infrastructure. The integrated power supply and autonomous firmware remove the need for separate host hardware.

Prednosti

  • 0 TH/s SHA-256 hashrate for solo Bitcoin mining
  • 170W power draw keeps efficiency near 21.25 J/TH
  • Industrial XT60 connector on included 250W supply prevents voltage drop
  • Copper heat-pipe plus auto-PWM fan keeps noise under 45 dB
  • Standalone 2.4 GHz WiFi node runs AxeOS without extra controller

Špecifikácie

BrandDiglucky
SeriesNerdQX
ModelNerdQX 8T
Part#DL-NerdQX8T
TypeDesktop Solo Miner
Crypto AlgorithmSHA-256
Compatible CurrencyBitcoin (BTC)
Mining HardwareASIC
Hashrate8.0 TH/s ±5%
Quantity of Hash ChipsMulti-Chip Array
Hash Boards1
Network Connection2.4GHz WiFi (Standalone AxeOS Node)
Noise level< 45dB (Office Acceptable)
FanCopper Heat-Pipe & Auto-PWM Fan
Power Supply250W Switching Power Supply (XT60 Interface) Included
Power Consumption170W ±10%
Power Efficiency~21.25 J/TH±10%
Operation Temperature0°C - 35°C (32°F - 95°F)
Storage Temperature-20°C - 60°C (-4°F - 140°F)
Operation Humidity10% - 90% RH (Non-condensing)
Storage Humidity10% - 90% RH (Non-condensing)
Dimension18.5 x 8.0 x 11.5 cm
Weight0.77 kg
Feature8.0 TH/s MASSIVE HASHRATE: Powered by a synchronized Bitmain BM1370 multi-chip ASIC array, delivering a highly stable 8.0 TH/s (±5%) cryptographic output for your desktop solo mining node.
ULTRA-EFFICIENT 170W POWER: Engineered for home environments, achieving an outstanding ~21.25 J/TH efficiency ratio. It draws only 170W under continuous load, maximizing compute density without tripping circuit breakers.
COPPER HEAT-PIPE COOLING: Features a custom copper dissipation substrate paired with an auto-calibrating PWM fan. This dynamic system constantly monitors ASIC telemetry to prevent
Package Content1x DigLucky NerdQX 8T Miner, 1x 250W Power Supply (XT60 Interface), 1x US Standard AC Cable

Otázky k tomuto produktu

Will the included 250W power supply run the miner continuously at its 170W draw?

Yes, the 250W unit provides headroom above the 170W typical load and connects via a gold-plated XT60 interface for stable 24/7 delivery.

Can I operate this miner in a typical home office without special cooling?

The copper heat-pipe and auto-PWM fan keep noise below 45 dB and the unit is rated for 0–35 °C ambient, so standard office conditions are sufficient.

Does the miner need an external controller or PC to configure pools?

No, it runs standalone AxeOS over 2.4 GHz WiFi; all stratum settings are managed through the embedded web console.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.