Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular aluminium fin stack with embedded copper heat pipes and a top-mounted fan, silver-grey finish

Dynatron

Dynatron N11 CPU cooler LGA 4189 205 W

SKU CH-7Z11-N6C2S MPN N11

Active LGA 4189 CPU cooler with embedded copper heat pipes, rated for 205 W dissipation in 2U servers

  • Supports Intel Ice Lake and Cooper Lake CPUs on LGA 4189
  • Dissipates up to 205 W for high-power server workloads
  • Aluminium stacked fins with embedded copper heat pipes improve thermal transfer
  • Compact 4.45 x 3.23 x 2.60 inch form factor fits 2U and taller racks
  • Active cooler design delivers reliable airflow for sustained operation

LGA 4189 Server Cooler

The Dynatron N11 is an active air cooler built for Intel Whitley platform processors using the LGA 4189 socket. It targets Ice Lake and Cooper Lake server CPUs in 2U and larger chassis. Buyers needing a cooler for different sockets or lower-profile 1U systems should look elsewhere.

205 W Thermal Capacity

Rated to dissipate up to 205 watts of CPU heat, the cooler uses an aluminum stacked-fin array with embedded copper heat pipes. No fan-speed curves, acoustic measurements or power-draw figures are supplied, so exact noise and thermal behaviour under load cannot be quantified.

Compact 2U Form Factor

The unit measures 4.45 by 3.23 by 2.60 inches, fitting standard 2U server heights. Its integrated fan and fixed mounting simplify installation in compatible racks, but the dimensions restrict use in tighter enclosures or non-standard layouts.

Helstu kostir

  • Supports Intel Ice Lake and Cooper Lake CPUs on LGA 4189
  • Dissipates up to 205 W for high-power server workloads
  • Aluminium stacked fins with embedded copper heat pipes improve thermal transfer
  • Compact 4.45 x 3.23 x 2.60 inch form factor fits 2U and taller racks
  • Active cooler design delivers reliable airflow for sustained operation

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How do I install the N11 on an LGA 4189 socket and which step is often missed?

Mount the cooler using the four captive screws that align with the LGA 4189-4/5 socket holes; the step often missed is tightening them in a diagonal pattern to ensure even pressure across the copper heat pipes.

What maintenance will the N11 need over its service life?

Periodically clean dust from the aluminium fin stack and verify the fan spins freely; the embedded copper heat pipes and aluminium fins require no fluid replacement or re-greasing.

What thermal limit appears first when the N11 runs at full load continuously?

The cooler is rated for 205 W heat dissipation; sustained loads above that level will cause CPU temperatures to rise beyond safe operating limits.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.