Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular aluminium fin stack with embedded copper heat pipes and a top-mounted fan, silver-grey finish

Dynatron

Dynatron N11 CPU cooler LGA 4189 205 W

SKU CH-7Z11-N6C2S MPN N11

Active LGA 4189 CPU cooler with embedded copper heat pipes, rated for 205 W dissipation in 2U servers

  • Supports Intel Ice Lake and Cooper Lake CPUs on LGA 4189
  • Dissipates up to 205 W for high-power server workloads
  • Aluminium stacked fins with embedded copper heat pipes improve thermal transfer
  • Compact 4.45 x 3.23 x 2.60 inch form factor fits 2U and taller racks
  • Active cooler design delivers reliable airflow for sustained operation

LGA 4189 Server Cooler

The Dynatron N11 is an active air cooler built for Intel Whitley platform processors using the LGA 4189 socket. It targets Ice Lake and Cooper Lake server CPUs in 2U and larger chassis. Buyers needing a cooler for different sockets or lower-profile 1U systems should look elsewhere.

205 W Thermal Capacity

Rated to dissipate up to 205 watts of CPU heat, the cooler uses an aluminum stacked-fin array with embedded copper heat pipes. No fan-speed curves, acoustic measurements or power-draw figures are supplied, so exact noise and thermal behaviour under load cannot be quantified.

Compact 2U Form Factor

The unit measures 4.45 by 3.23 by 2.60 inches, fitting standard 2U server heights. Its integrated fan and fixed mounting simplify installation in compatible racks, but the dimensions restrict use in tighter enclosures or non-standard layouts.

Přednosti

  • Supports Intel Ice Lake and Cooper Lake CPUs on LGA 4189
  • Dissipates up to 205 W for high-power server workloads
  • Aluminium stacked fins with embedded copper heat pipes improve thermal transfer
  • Compact 4.45 x 3.23 x 2.60 inch form factor fits 2U and taller racks
  • Active cooler design delivers reliable airflow for sustained operation

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

How do I install the N11 on an LGA 4189 socket and which step is often missed?

Mount the cooler using the four captive screws that align with the LGA 4189-4/5 socket holes; the step often missed is tightening them in a diagonal pattern to ensure even pressure across the copper heat pipes.

What maintenance will the N11 need over its service life?

Periodically clean dust from the aluminium fin stack and verify the fan spins freely; the embedded copper heat pipes and aluminium fins require no fluid replacement or re-greasing.

What thermal limit appears first when the N11 runs at full load continuously?

The cooler is rated for 205 W heat dissipation; sustained loads above that level will cause CPU temperatures to rise beyond safe operating limits.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.