Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Square black metal axial fan 80 by 80 by 38 mm two wire outlet

Fans

Fans 3E-230BSize case fan 80x80x38mm 230V 13/12W 2700RPM 26CFM 31DBA

SKU CH-0KP5-RWN42 MPN 3E-230BSize

An 80 mm axial case fan with double-ball bearings moves 26 CFM at 2700 RPM while running on 230 V AC

  • High-temperature copper core suits demanding industrial environments
  • Double ball bearing extends operational lifespan in continuous use
  • 26 CFM airflow delivers effective cooling for compact enclosures
  • 31 DBA noise level keeps acoustic impact low
  • Two-wire 230 V connection simplifies mains-powered installation

80 mm 230 V axial fan for industrial cooling

The Fans 3E-230BSize is an 80 by 80 by 38 mm axial fan that runs directly from 230 V mains. It is built for equipment enclosures, medical devices, rail vehicles and other industrial systems that need continuous airflow without a separate power supply. The two-wire outlet simplifies wiring in fixed installations.

Sustained airflow at 2700 RPM

At full speed the fan moves 26 CFM while producing 31 dBA of noise. Double-ball bearings and a 180-degree copper core winding rated for high temperature allow the motor to run continuously under load without the wear that sleeve bearings exhibit in long-duty cycles. Power draw stays at 13 or 12 watts depending on line conditions.

Two-wire mains connection suits fixed chassis

Installation consists of securing the 80 mm square frame with four screws and connecting the two-wire outlet to a 230 V circuit. No PWM or speed-control header is present, so the fan runs at constant speed whenever power is applied. Builders who need variable speed, low-voltage operation or a standard PC fan header will find this model unsuitable.

Helstu kostir

  • High-temperature copper core suits demanding industrial environments
  • Double ball bearing extends operational lifespan in continuous use
  • 26 CFM airflow delivers effective cooling for compact enclosures
  • 31 DBA noise level keeps acoustic impact low
  • Two-wire 230 V connection simplifies mains-powered installation

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How loud is the 31DBA double-ball-bearing fan when it runs 24/7?

The fan produces 31DBA at 2700RPM, so continuous operation stays at that steady noise level.

Does the two-wire 230V outlet need any extra connector or controller to work?

It connects directly to a 230V AC supply via its two-wire outlet; no additional connector or controller is required.

Will the 80x80x38mm frame and 26CFM airflow fit the same cut-out as my existing 80mm fan?

Yes, the 80x80x38mm dimensions match standard 80mm mounting holes, and 26CFM provides comparable airflow.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.