Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Square black metal axial fan 80 by 80 by 38 mm two wire outlet

Fans

Fans 3E-230BSize case fan 80x80x38mm 230V 13/12W 2700RPM 26CFM 31DBA

SKU CH-0KP5-RWN42 MPN 3E-230BSize

An 80 mm axial case fan with double-ball bearings moves 26 CFM at 2700 RPM while running on 230 V AC

  • High-temperature copper core suits demanding industrial environments
  • Double ball bearing extends operational lifespan in continuous use
  • 26 CFM airflow delivers effective cooling for compact enclosures
  • 31 DBA noise level keeps acoustic impact low
  • Two-wire 230 V connection simplifies mains-powered installation

80 mm 230 V axial fan for industrial cooling

The Fans 3E-230BSize is an 80 by 80 by 38 mm axial fan that runs directly from 230 V mains. It is built for equipment enclosures, medical devices, rail vehicles and other industrial systems that need continuous airflow without a separate power supply. The two-wire outlet simplifies wiring in fixed installations.

Sustained airflow at 2700 RPM

At full speed the fan moves 26 CFM while producing 31 dBA of noise. Double-ball bearings and a 180-degree copper core winding rated for high temperature allow the motor to run continuously under load without the wear that sleeve bearings exhibit in long-duty cycles. Power draw stays at 13 or 12 watts depending on line conditions.

Two-wire mains connection suits fixed chassis

Installation consists of securing the 80 mm square frame with four screws and connecting the two-wire outlet to a 230 V circuit. No PWM or speed-control header is present, so the fan runs at constant speed whenever power is applied. Builders who need variable speed, low-voltage operation or a standard PC fan header will find this model unsuitable.

Prednosti

  • High-temperature copper core suits demanding industrial environments
  • Double ball bearing extends operational lifespan in continuous use
  • 26 CFM airflow delivers effective cooling for compact enclosures
  • 31 DBA noise level keeps acoustic impact low
  • Two-wire 230 V connection simplifies mains-powered installation

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How loud is the 31DBA double-ball-bearing fan when it runs 24/7?

The fan produces 31DBA at 2700RPM, so continuous operation stays at that steady noise level.

Does the two-wire 230V outlet need any extra connector or controller to work?

It connects directly to a 230V AC supply via its two-wire outlet; no additional connector or controller is required.

Will the 80x80x38mm frame and 26CFM airflow fit the same cut-out as my existing 80mm fan?

Yes, the 80x80x38mm dimensions match standard 80mm mounting holes, and 26CFM provides comparable airflow.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.