Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Square 60 mm axial case fan, black frame, three-wire 3-pin connector

Fans

Fans Delta 6025 60x60x25mm 24V 0.21A 3.6W 30dBA 45CFM case fan

SKU CH-BT7P-RVY6F

A 60 mm two-ball-bearing axial fan moves 45 CFM at 30 dBA while drawing 0.21 A from a 24 V three-pin header

  • 45 CFM airflow moves heat fast from tight cases
  • 30 dBA noise level keeps the system quiet
  • Two ball bearing design rated for 100000 hours of operation
  • 24 V 0.21 A 3.6 W power draw suits low-voltage builds
  • 60 x 60 x 25 mm frame fits standard 6025 mounting points

60 mm 24 V axial case fan

This 60 x 60 x 25 mm fan runs on 24 V and draws 0.21 A for 3.6 W of power. Two ball bearings and a 100 000 hour rated life suit continuous duty in industrial or PC chassis cooling. The three pin power interface supplies voltage only with no speed signal. Airflow reaches 45 CFM at a stated 30 dBA noise level.

Three pin plug installs in seconds

The 3 PIN connector fits standard motherboard or controller headers without adapters. No RPM control wire is present so the fan runs at full speed whenever powered. Polarity follows the usual ground, 24 V, sense order; reversing the plug will prevent operation. Clearance of 25 mm depth is required behind the mounting surface.

Fixed speed limits thermal tuning

Without PWM or voltage regulation the airflow and noise stay constant regardless of load. Builders who need variable speed or software fan curves cannot use this model. The 45 CFM rating is the single operating point; higher static pressure or lower acoustic targets need a different fan. The 24 V supply rail must be available in the system.

Helstu kostir

  • 45 CFM airflow moves heat fast from tight cases
  • 30 dBA noise level keeps the system quiet
  • Two ball bearing design rated for 100000 hours of operation
  • 24 V 0.21 A 3.6 W power draw suits low-voltage builds
  • 60 x 60 x 25 mm frame fits standard 6025 mounting points

Tæknilýsing

Engin birt tæknilýsing fyrir þessa vöru enn.

Spurningar um þessa vöru

How do I verify the fan is running correctly after installation?

Listen for steady airflow and confirm the 30 dBA noise level; the two ball bearing design rated for 100000 hrs should spin smoothly without vibration or rattle.

What comes in the box and what must I source separately?

The fan unit with 3-pin power connector is included; mounting screws and any PWM controller or adapter cables are not supplied and must be purchased separately.

Which Delta 6025 variant should I pick for a 24 V system needing 45 CFM?

Choose the QFR0624GH model with 24 V, 0.21 A, 3.6 W, 30 dBA and 45 CFM — it matches those exact specifications.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.